Posts Tagged ‘Del Mar’

« Older Entries

Money Saving Tips in Del Mar: Heat Your Crawl Space

Monday, April 30th, 2012

If you’re like most people in Del Mar, you probably focus on how to keep the living areas of your home warm and comfortable in the winter months. Of course, you want to do this with as little expense as possible and so installing heating systems and insulation in all of the rooms of your home naturally makes sense. The main goal of this is to eliminate any areas where heat might be able to escape, thereby causing you to spend more and run your heating system for longer to keep the temperature indoors at an acceptable level.

What you might not often think about, however, is the fact that the crawlspace under your floors is probably not insulted at all. Of course you and your family don’t spend much time there, but if you’re trying to keep your home comfortable for as small a price tag as possible, this is something you should think about addressing.

There are actually several reasons that heating and insulating your crawlspace can save you money in the long run. For one thing, the ducts and pipes that carry your heated air and water to various locations throughout your house generally run right through these very crawl spaces. Even with an average amount of insulation surrounding those pipes and ducts, you’ll still be losing heat to the outdoors as the air and water travel through the crawl space.

Of course, pumping heat directly into the crawl space would be a waste too, since there is no insulation to keep it there. With the proper amount of insulation, however, you can easily heat your crawl space with very little energy and potentially save a ton in the long run.

When your ducts and pipes are traveling through a heated space, they’ll retain the heat they started with and bring that to the rest of your home. You’ll pay very little to keep the crawl space warm and you’ll save a lot by conserving the heat and hot water that you do generate to keep your house comfortable.

Plus, because your crawl space is generally located directly underneath the floor, you’ll be protecting the actual rooms of your home from heat loss as well. And you floors won’t be so cold to walk on either. Overall, there really is no reason not to take the time and have your crawl space properly insulated and heated.

Tags: , ,
Posted in Heating, Heating Systems, Installing Heating Systems | Comments Off

How Heat Pumps Can Help With Humidity in Del Mar

Wednesday, February 8th, 2012

Humidity is a big problem for a lot of families in Del Mar. When not properly controlled, excess humidity can lead to damage to your furniture, excess mold growth and dust mites. In the warmer months of the year, this is a big problem. Fortunately, if you have a new heat pump, you have a strong weapon against excess humidity.

Heat pumps have both cooling and heating modes. In the winter, when your heating mode is active, you likely don’t need dehumidification. In fact, you may need a humidifier to keep it from getting too dry in your home. However, in the summer, excess humidity can make everyone uncomfortable.

Air conditioning has long been a natural dehumidifier. Because the process works through evaporation and condensation, water can be extracted from the air by the device whenever it is on.

However, for your heat pump to truly provide the dehumidification you need to remain comfortable, it must first have a dehumidification setting – often called the “dry” cycle. During this cycle, the device will dehumidify your home, pulling air from inside the house and extracting moisture from it through the indoor evaporator coils.

Dry cycling is effective because it doesn’t draw new air in from outside to cool your home. It uses the same air already in your home and can therefore remove humidity over time. While new air is draw into your home through vents, the system is designed to continuously cycle the humidity out of the air and keep you from being uncomfortable.

Choosing the Right Heat Pump for Humidity Control

Not all heat pumps offer humidity control settings, so contact Cal-West HVAC experts about your needs before selecting a new model for your home. Make sure it offers the dehumidification options you’re looking for and can cover the full area of your home.

Tags: , ,
Posted in Air Conditioning, Dehumidifiers, Heat Pumps | Comments Off

A Fallbrook HVAC Contractor’s Guide: Home Energy Myths

Monday, November 28th, 2011

Measuring and controlling your Fallbrook home’s energy consumption is a little tricky. There are plenty of talking heads and information resources on the Internet that tell you how it’s supposed to work, but in most cases you’ll find that so called common knowledge about your home’s energy use isn’t always true. Here are some of the most common myths and how to differentiate from the truth.

  1. Conservation and Efficiency Are Different – Many people think that by getting an energy efficient appliance, they are conserving energy and helping the environment. To some degree this is true. However, in reality, you are merely reducing how much energy it takes to complete a task. Conservation is finding ways to actually stop using energy for common tasks. Taking baths instead of showers, not watering your lawn, and turning off lights completely are all examples of conservation.
  2. Turning Off an Appliance Saves a Lot of Energy – Regardless of whether an appliance is physically on or not, it still consumes power as long as it is plugged in. The only way to completely stop your energy consumption is to unplug an item completely or use a power strip that blocks access to electricity when the switch is turned to off.
  3. Turning on Items Creates a Power Surge – While turning a computer on and off uses a bit more electricity than simply leaving it on all the time, it isn’t a significant difference. In fact, the longer you leave an appliance on, the more it wears down and the faster it starts to use extra power to remain effective.
  4. Extra Insulation Creates Pressure – If you insulate a certain area of your home, you don’t need to worry about air leaking out. While it’s a good idea to complete all of your insulation at the same time, if you skip the windows or doors for now, it won’t hurt. All insulation is a good investment, no matter how much you install at any given time.
  5. One Energy Source is Cheaper than Another – This depends largely on the type of energy source you have for heating and cooling, the cost of that source and how much heating and cooling you need. A single portable electric heater is cheaper than running your entire oil heating system. But, electric heaters are rarely cheaper if you use them to heat your entire home.

Myths abound when it comes to energy use around your home. Make sure to get all the facts before making decisions that could end up costing you more money in the long run.

Tags: , , , , ,
Posted in Energy Savings | Comments Off

Pros & Cons of Heat Pumps: A Guide from Del Mar

Monday, November 14th, 2011

When deciding on any major purchase for your Del Mar home, a critical step is to weigh the pros and cons. This helps you to decide on the best option and reach the best decision for your needs and preferences.

Installing a new heating system is a perfect example of a situation in which you would need to weigh pros and cons. There are a lot of options, and not all of them are right for all people. Take heat pumps, for example. They are great devices and serve many people extremely well as home heating solutions, but they are not without their drawbacks. Below are some of the pros and cons of heat pumps to help you decide whether a heat pumps if the way to go for you.

Pros:

  1. Inclusive – A heat pump not only heats your home in the winter but also cools it in the summer, thanks to a reversing valve that changes the flow of the refrigerant. Having one appliance for both heating and cooling can be very convenient.
  2. Energy efficient – Heat pumps are extraordinarily efficient when it comes to energy use. Because they simply move and distribute heat, rather than producing any on their own, they use minimal electricity.
  3. Simple – Operating on the same basic principles as your refrigerator or an air conditioner, heat pumps are relatively simple. More importantly, they simplify your life by putting your heating and cooling solutions in one package and running on electricity, so you don’t need any other fuels on hand.
  4. Inexpensive to operate – In addition to being energy efficient – which lowers your monthly energy bills – many heat pumps are eligible for federal tax credit. You can save a bundle by using a heat pump.

Cons:

  1. May need supplementing in cold climates – In climates where winter temperatures stay below 30 degrees Fahrenheit for a while at a stretch, a heat pump will have trouble keeping up and need to be supplemented.
  2. Don’t work in power outage – Obviously, because they are powered by electricity, a heat pump won’t work in a power outage, unlike some other heating solutions that do not require electricity.

Although the pros clearly outweigh the cons here, the cons are important as well. Carefully consider all these factors and more while deciding whether a heat pump is the solution for you.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

How to Clean the Parts of a Heat Pump? A Question from El Cajon

Wednesday, November 9th, 2011

It is very important to keep your heat pump clean. It improves efficiency, helps performance and prevents malfunctions. Cleaning your heat pump should be part of your El Cajon home’s maintenance routine in order to keep the house as comfortable and worry-free as possible.

That is all well and good, but how do you go about cleaning the components of your heat pump. It’s one thing to advise you to clean, clean, clean…but it doesn’t do much good if you do not know how. To correct that, here are some tips to help you clean the different parts of your heat pump.

Caution: before doing any maintenance on your heat pump, including cleaning, be sure to turn off the power to the unit. This is a necessary safety measure.

Filters

  • If you use disposal air filters in your heat pump, skip this part. Just make sure to change them regularly, in accordance with the manufacturer’s instructions.
  • To clean air filters, follow the directions of the manufacturer that were included with the filter. This is also a good time to double check that the filters are installed properly.
  • Clean or replace your filters monthly during heavy use seasons, such as the warm summer months and cold months of late fall and winter.

Coils

  • Remove any debris from the outside of the coils and the surrounding area. Sticks and leaves may have accumulated near the outdoor coils, so just brush them away.
  • Using a soft brush attachment, vacuum the exterior of the coils. Take care not to bend or dent the coils.
  • Using a hose with a spray attachment, flush the coils with water from the inside out. This will remove any stubborn debris. Take care not to spray any electrical components, such as the fan or any nearby wires.
  • While you are inside the unit, vacuum the bottom inside to get rid of any more stray debris.

With that done, put everything back, replace the grille covers and power the heat pump back on. It should run smoothly with a fresh filter and no debris to gum up the works. Clean the coils every few months to keep the heat pump in tip top shape.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Make Your Heating System More Energy Efficient: A Guide from Linda Vista

Wednesday, November 2nd, 2011

Energy efficiency is what you want when it comes to heating your Linda Vista home. You want a furnace that provides the greatest degree of accurate indoor comfort while at the same time operating at peak efficiency to reduce energy usage and lower utility bills. That’s seems like a lot to ask of a simple mechanical system but you should expect it out of the furnace in your basement, attic, or mechanical room.

It is especially important today as energy costs have steadily increased, including electricity, natural and propane gas, and oil. The best way to combat rising prices is to have a furnace that uses less energy. It is a simple statement but one that bears repeating: higher efficiency equals lower operating costs.

Here are some ways to make your heating system more energy efficient:

  1. Clean or replace furnace filters on a regular basis. A dirty or clogged filter will make your furnace work harder and become much less energy efficient. Monthly or quarterly cleaning or replacements are easy to do and will result greater operating efficiencies.
  2. Inspect your home’s ventilation system for accumulation of dirt, dust, or debris. Have you recently added new carpeting? Do your pets shed? Is there a large number of people living in your home? If you answered yes to any of these questions you may need to inspect your ventilation system. You may need to remove the ventilation grilles to take a closer look. Wiping down the inside of your duct work or vacuuming the duct work with a hose attachment will often do the trick. You can also schedule a duct cleaning with a local professional duct cleaning contractor.
  3. Remove obstructions from around vents and grilles. You need a clean path for air to flow into and out of rooms. Restricted airflow makes your furnace work harder and become less energy efficient.
  4. Consider an upgrade to a two-speed or variable speed furnace. Most older furnaces operated on one speed, which cycled on and off and consumed a lot of energy. Today’s furnaces operate at lower speeds, consuming less energy and often remaining on to keep a steady airflow and prevent constant on and off cycling. These newer furnaces are much more energy efficient and cost less to operate.
  5. Adhere to a regular schedule of planned furnace maintenance. If you don’t clean and inspect your furnace on a regular basis, schedule service calls with a local qualified heating contractor. Your contractor will likely have a service agreement plan to fit your budget, which allows for annual inspections, priority emergency service calls, and discounts on parts and services.

Besides saving on energy costs, your efficient furnace will leave a smaller “carbon footprint.” Your efficient furnace will exhaust less carbon dioxide into the atmosphere and maintain a more “green” profile. And being ecologically friendly can be just as important as saving money.

You can be assured that an energy efficient heating system will keep more money in your pocket this fall and winter. You can take that to the bank.

Tags: , , , , , , ,
Posted in Heating | Comments Off

Is it Cost Effective to Use a Ceiling Fan and AC at the Same Time? A Question From Lemon Grove

Monday, October 10th, 2011

There are a lot of ways to keep your Lemon Grove house cool in the summer, and chances are you’ve incorporated more than one of them into your home already. For instance, ceiling fans are great and can really keep you comfortable in moderately hot weather. But when the heat and humidity really start to pick up, you need something a little more powerful to take the edge off, and that’s usually some type of air conditioner.

One or the Other?

If you’re like most people, you switch off your ceiling fan when the AC comes on. After all, the air conditioner is powerful enough to cool the house on its own. So is it really worth it to expend energy running another, secondary cooling device?

In fact, it is. Ceiling fans in particular use very little energy. Yet they’re quite effective at making your home feel cool and comfortable. So there’s really no reason not to take advantage of their benefits while running your AC.

Cutting Costs

You might be surprised to learn that far from being a waste of energy, using your ceiling fan and AC at the same time can actually save you money. That’s because the cooling power of the fan allows you to turn up the thermostat on your AC unit a couple of degrees without compromising your comfort levels.

And turning up the thermostat on the AC just that small amount will translate into pretty substantial savings on your monthly energy bills. That savings will more than pay for the cost of running the ceiling fan, and you save money.

Better Air Circulation

Running the ceiling fan with the AC on or off is always helpful in terms of promoting good air circulation throughout your house. And the more air circulates, the more comfortable your indoor environment will be. Good air circulation is also important because it helps to minimize the number of air contaminants that build up inside.

More Efficient Heating

The benefits of ceiling fans don’t stop with cooling either. In fact, you can run them in reverse to help maintain even heating in the winter. Essentially, there are few investments you can make that will serve you better throughout the year than a ceiling fan regardless of the other home heating and cooling systems you have in place.

Tags: , , , , , ,
Posted in Energy Savings | Comments Off

Simple Filter Tips From Del Mar: How to Keep Your Ducts Clean

Monday, October 3rd, 2011

If there’s one thing you can count on with a home comfort system in Del Mar, it’s that there will be higher energy bills in the summer and an increase in dust and debris in your ductwork. But, luckily the latter can be fixed with a few simple filtration upgrades in your home.

The Nature of a Forced Air System

When you flip the switch on your thermostat and your air conditioner or furnace turns on, it starts drawing air from inside your house, conditioning it to the right temperature, and then circulating it back into your rooms through an air handler and ductwork. Of course, a good system should have proper ventilation to circulate new air into the house, but let’s face it – no matter how much ventilation you have in your home, there will always be dust and debris from things like pets, plants and other common household items.

So, when the air gets circulated back through the ducts, all sorts of debris and sediment build up. That’s not to mention the possible presence of actual contaminants like bacteria or mold. Luckily, because of how your forced air system is built, these are not tough problems to deal with.

Installing the Right Filters

Filtration is incredibly important for adding the right level of protection to your home’s ductwork. Usually placed directly within your air handlers, whole house air filters are designed to capture particles as small as 0.3 microns (if you purchase a high quality HEPA filter). That pretty much covers all dust, sediment, pollen, dander and other common allergens.

There are a number of other upgrades you can make to capture just about everything you house spits into those ducts – from bacteria and viruses to smoke and other air pollutants, but at the very least a good filter system will save your lungs, cut back on duct cleaning costs and make it much easier to maintain your home’s air quality throughout the year.

To learn more about HEPA filters and the specific ratings offered in various products, here is a link to the EPA’s guide to home air cleaners. It has a handy breakdown of different types of filtration and what each filter grade can capture.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

What is the COP and Why Is It Important? A Question From Del Mar

Monday, September 5th, 2011

If you’ve been researching air conditioners in Del Mar, you’ve probably seen all sorts of numbers associated with each model. One of these numbers is the Coefficient of Performance (COP). While it’s good to gather as much data as you can before you make a purchasing decision, you also need to know what that data means if it’s going to help you make the best selection possible.

Measuring COP

Calculating the COP for any air conditioning model is relatively simple. The number you see displayed on the box is the ratio of energy input to cooling output. For the most part, the air conditioners you’re probably been looking at have a COP of between 2.5 and 4.0, although newer models are beginning to appear with COPs of up to 5.0.

The higher the COP, of course, the more efficient the air conditioner, so it makes sense to take this number into account when you’re making your purchase. You should also keep in mind, though, that the COP is not a constant measurement. The warmer it is outside, the lower your unit’s COP will be. However, this is standard across all units, so a relative COP comparison is still a viable evaluation method.

If you’re not sure what COP you should look for or whether a lower number will be effective for your home (especially if you only need to cool a small space), you should talk to a professional who can help you match the right COP level to your particular living space.

Improving Efficiency

While it’s always a good idea to get an air conditioner with the best energy efficiency ratings possible, that’s not the only thing you can do to reduce your energy usage and keep your cooling costs down. For instance, there are plenty of ways to keep your home naturally cooler without even turning on the air conditioner.

Even when you do need to flip it on, anything else you can do to reduce the indoor temperature will make it easier for your air conditioner to keep your house comfortable. So put up some awnings, run the ceiling fan and close the blinds to block out that harsh afternoon sun. The more you can do to reduce your indoor temperature naturally, the less your air conditioner will have to do, and the lower your cooling costs will be.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

How to Stay Affordably Cool This Summer

Monday, July 25th, 2011

Putting in a high quality, energy efficient air conditioning system is a great step to take when you are trying to keep your house cool and comfortable all summer without paying a fortune in cooling costs. Many of the latest air conditioners are able to use very little energy to provide powerful cooling power to your house no matter how big it is.

But if you are really serious about keeping cool and keeping costs down, there are plenty of other things you can do to give your air conditioning system a hand. It might seem silly, but putting in a little bit of effort around the house can save you quite a bit in the long run.

For instance, since you are paying to keep the air in your house cool, it is a good idea to make sure that the air you are cooling stays in your house. Sealing off unused doors and windows with plastic is an excellent precaution to take to ensure that no cooled air leaks out through the cracks and door jambs. Also, you will want to check for any other openings that could create a draft and allow cool air to escape or warm air to get in.

However, just letting in air from outside in the summer is not the only way that the heat can get in. The sun is powerful in the summer and the more you can block of it, the cooler your house will be. So make sure that your blinds are closed to block out the sun, particularly in the afternoon. Morning sun is not nearly as powerful as the sun you get towards the middle and later part of the day.

All of these steps will help to take the pressure off of your air conditioning system and allow it to get its job done with a minimum of energy expended. And that will certainly save you money every month. You can save even more, though, by adjusting the temperature on your thermostat a bit as well.

Most air conditioning systems are set to a default temperature of 72°F. While this is probably quite comfortable for you, it is likely that you would be equally as comfortable at 75°F. In fact, you probably will not even notice the difference. But that small adjustment can actually save you quite a bit on your monthly cooling bills.

Tags: , ,
Posted in Air Conditioning | Comments Off

« Older Entries