Posts Tagged ‘Encinitas’

« Older Entries

Money Saving Tips in Del Mar: Heat Your Crawl Space

Monday, April 30th, 2012

If you’re like most people in Del Mar, you probably focus on how to keep the living areas of your home warm and comfortable in the winter months. Of course, you want to do this with as little expense as possible and so installing heating systems and insulation in all of the rooms of your home naturally makes sense. The main goal of this is to eliminate any areas where heat might be able to escape, thereby causing you to spend more and run your heating system for longer to keep the temperature indoors at an acceptable level.

What you might not often think about, however, is the fact that the crawlspace under your floors is probably not insulted at all. Of course you and your family don’t spend much time there, but if you’re trying to keep your home comfortable for as small a price tag as possible, this is something you should think about addressing.

There are actually several reasons that heating and insulating your crawlspace can save you money in the long run. For one thing, the ducts and pipes that carry your heated air and water to various locations throughout your house generally run right through these very crawl spaces. Even with an average amount of insulation surrounding those pipes and ducts, you’ll still be losing heat to the outdoors as the air and water travel through the crawl space.

Of course, pumping heat directly into the crawl space would be a waste too, since there is no insulation to keep it there. With the proper amount of insulation, however, you can easily heat your crawl space with very little energy and potentially save a ton in the long run.

When your ducts and pipes are traveling through a heated space, they’ll retain the heat they started with and bring that to the rest of your home. You’ll pay very little to keep the crawl space warm and you’ll save a lot by conserving the heat and hot water that you do generate to keep your house comfortable.

Plus, because your crawl space is generally located directly underneath the floor, you’ll be protecting the actual rooms of your home from heat loss as well. And you floors won’t be so cold to walk on either. Overall, there really is no reason not to take the time and have your crawl space properly insulated and heated.

Tags: , ,
Posted in Heating, Heating Systems, Installing Heating Systems | Comments Off

Encinitas Indoor Air Quality Question: What Type of Air Cleaner Is Best for People with Pets?

Monday, February 6th, 2012

Lots of people in Encinitas have pets, and they are a great addition to your family. However, pet ownership has one very obvious drawback: dander. The fur, dry skin cells and other debris that pets carry around flakes off their bodies and onto your furniture and rugs. The also means they inevitably wind up in your air, recirculated through your whole house via your HVAC system.

Or at least, that’s what happens if you don’t have an air cleaner or some sort of air filtration system. This leads many pet owners to ask, “what is the best air cleaner for me?”

With all the choices in air cleaners, the choice can seem daunting. If the goal is specifically to filter out pet dander, it becomes somewhat easier.

Pet dander is quite large in size relation to other indoor air pollutants, so many air cleaners are equipped to do the job. You can use an air cleaner with a standard pleated HEPA filter, or one that uses electrostatic technology. You will want to make sure that the HEPA filter is rated to handle pet dander. A MERV rating of 8 or more is recommended.

Once you have an air cleaner installed, make sure to change or clean the air filter frequently, in accordance with manufacturer instructions. A clogged air filter won’t help eliminate pet dander from your household air and can actually degrade the operation of your HVAC system’s air handler.

In addition to installing a high quality air cleaner with a HEPA filter, you can also help reduce the amount of pet dander floating around your Encinitas home by keeping the place clean. Vacuuming often and dusting hard surfaces weekly keeps pet hair and dander from being drawn up into the HVAC system, which reduces wear on the air cleaner. If you have any questions about how you can improve your indoor air quality, contact your HVAC pros at Cal-West.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

Basic HVAC Terminology for San Diego Homes

Wednesday, February 1st, 2012

Every home owner in San Diego should know this basic information about their heating and air conditioning systems. There are dozens of terms that might as well be Greek for many people – and they are a mishmash of words and phrases talking about energy efficiency and air flow ratios. To make your next upgrade a little easier and give you a baseline with which to work, here are a few of the most common HVAC terms you’ll hear in the industry:

  • AFUE – Annual Fuel Utilization Efficiency – This is a simple measurement of how much fuel a furnace converts into actual heat in your home. So, if a furnace converts 92% of the fuel it consumes into heat, it has an AFUE rating of 92.
  • Watts – A single watt is a measurement of electricity. Commonly, your electricity use is assured in kilowatts or kilowatt hours (kWh).
  • BTU – British Thermal Unit – A BTU is a common measurement of how much energy is produced or consumed by an appliance. When referring to an air conditioner, one “ton” refers to 12,000 BTUs.
  • SEER/EER – Seasonal Energy Efficiency Ratio refers to how many BTUs can be produced with a single Watt of electricity per hour. So, an air conditioner with an SEER of 14 can produce 14 BTUs of cooling per watt consumed each hour.
  • HSPF – Heating Seasonal Performance Factor – Refers to the efficiency of the heating elements in your heat pump.
  • COP – Coefficient of Performance – A measurement of how effective your heat pump is at heating a space compared to standard electrical resistance heat. The lower the temperature gets outside, the lower the COP will be. Equipment is usually measured for COP at 47 and 17 degrees to give an idea of seasonal performance of a new heat pump.
  • Refrigerant – Refrigerant is any gas that is used to draw heat from the air in a particular environment through an air conditioner or heat pump. It has a much lower boiling point than water, allowing it to cool despite the temperature outside. Currently, most equipment uses R-22 refrigerant while the new standard will be R-410A (Puron), legally required in all cooling units by 2020.
  • CFM – Cubic Feet per Minute – Used to measure the volume of air passed through an air handler by an air conditioner or furnace.

There are a number of complicated details to keep track of when choosing a new air conditioner or furnace. To ensure you get the very best out of your system, read up on these details in advance – you’ll feel a heck of a lot smarter when you call.

Tags: , ,
Posted in Air Conditioning, Heat Pumps, Indoor Air Quality | Comments Off

Lemon Grove Heat Pump Repair Question: Why Won’t My Heat Pump Start?

Wednesday, January 25th, 2012

If you are having trouble with your Lemon Grove home’s heat pump, you may be surprised to learn that it is probably not the heat pump that is to blame, especially if the trouble is that it simply won’t start up. That seems counterintuitive, but it’s true: the heat pump can be in perfect working order but still not turn on.

The good news, then, is that your heat pump is fine and you won’t have to pay an arm and a leg to fix or replace it. Still though, these types of problems can very frustrating to diagnose and correct. Here are four common culprits when a heat pump won’t start:

  1. No power to the heat pump. Check your breaker box to see if the circuit breaker was tripped. If so, reset it and see if that fixes the problem. Another possibility is that your heat pump is wired to a wall switch, or that there is a switch on the unit itself. Make sure the switch is turned on.
  2. Make sure the thermostat is set to the proper mode, such as “heat” mode if you desire more heat. It seems overly simple, but sometimes the trouble is as simple as that.
  3. A recently replaced thermostat. If you recently upgraded or replaced the thermostat in your home, it’s possible that something went wrong that is preventing your heat pump from starting. It may be the wrong kind of thermostat – heat pumps require a specific type – or it may have been improperly wired.
  4. Finally, the heat pump may have its own circuit breaker on the air handler cabinet. This is often the case with heat pumps that have supplemental electric elements. If that breaker is tripped, that could cause the problems you are experiencing.

If you exhaust these problems and the problem persists or recurs – for example, if the circuit breaker trips again – call a contractor to work on your heat pump. There may be something larger at work that is causing problems in the electrical system that controls your Lemon Grove home’s heat pump, and that requires some expertise to properly address.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Common National City Heat Pump Problems

Monday, January 2nd, 2012

Heat pumps are great pieces of machinery to have in your National City home, but they are not perfect. They come with their own problems and issues. Usually these can be fixed pretty easily, but it’s good to know what you are looking for.

Below are some common problems encountered by heat pump owners, along with some brief troubleshooting and repair advice. However, for any serious repair job, it is recommended that you call in a National City professional to fix the problem. This is to ensure the best performance of your heat pump, as well as for your own safety.

  1. No Heat – Obviously, this is a problem. A heat pump should do two things—heat and cool. If it’s not heating at all, something is wrong. Sometimes, this is just a matter of the power supply being interrupted. Press the “Reset” button on the power supply. If that does not fix it, it could be that the power supply has failed or the motor is overloaded.
  2. Incorrect Temperature – For example, you set the thermostat at 72 degrees, but even after several hours, the temperature won’t get over 70 degrees. This can be a problem with the sensor in the thermostat or with the heat pump itself. However, it could also just be the result of very cold temperatures outside. Heat pumps have trouble keeping up when the weather is consistently below 30 degrees Fahrenheit or so, so it may just need help in the form of a supplemental heat supply.
  3. It’s Noisy – Heat pumps are generally designed to run very quietly, so if you notice a lot of noise, there is probably something going on. Common culprits for this type of issue include loose connections, like screws, nuts and bolts. Check for any loose fittings on the heat pump. Also, make sure the contractor who does your annual heat pump inspection tightens these fittings as part of his maintenance routine.
  4. Frozen – This can be indicative of a few underlying problems, but the most common is dirt in the air filter. When filters get clogged, the heat pump can get frosted, ultimately leading to freezing. Check the air filter and make sure to change all air filters regularly.

Heat pumps can experience other issues, but these are some of the more common ones. Generally, though, heat pumps are pretty headache-free machines. Be sure to call a National City professional repair person if you experience any issues with your heat pump.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Signs of an Undersized Furnace in Solana Beach

Wednesday, December 14th, 2011

If you’re purchasing a new furnace for your Solana Beach home, you want to avoid buying one that is undersized for your particular space. To do that, here are some common signs that the furnace isn’t powerful enough for the heating needs of your home. These signs might appear for an older furnace as well, especially as it ages and loses its ability to provide adequate heat for your home.

Maintaining Temperature

The most common (and in many cases only) sign that your furnace is undersized is that the device simply doesn’t maintain the temperature in your home properly. This means that when turned on to full and left for a few hours, your furnace doesn’t heat your home to the thermostat setting.

This can be due to an improper load calculation or a load calculation that wasn’t taken at all. The perfectly sized furnace will heat your home evenly on the coldest day your area is likely to have. So, undersizing should be pretty evident – if it doesn’t heat your home evenly and it’s not exceptionally cold outside, you might not have enough BTUs under the hood.

How to Fix the Problem

The problem is one that varies depending on the severity of the undersizing. Modern furnaces are often available with two stages, meaning they can operate at both a low BTU rating (often around 40K or so) and a higher BTU rating (70K or higher). This is the perfect solution for homeowners worried about undersizing because it ensures that your home always has enough heat in reserve should the weather get exceptionally cold.

For example, most furnaces are sized for extremely low temperatures, but if the temperature jumps up to 50 degrees Fahrenheit outside, your furnace is now oversized for that weather. A two stage furnace offers solutions for both common conditions and extreme conditions and will resolve most of the concern you have about undersizing and not having enough heat to offset outdoor temperatures.

Tags: , , , , ,
Posted in Heating | Comments Off

Why Should I Clean My Air Ducts? A Guide from Rancho Penasquitos

Friday, December 2nd, 2011

You know it’s important to keep your Rancho Penasquitos home’s air ducts clean, but why?

Actually, there is no one reason why your air ducts need to be kept clean—there are several, all of which are connected to one another. Here are five of them for you to consider:

  • Efficiency – Clean air ducts allow the air to flow through much easier and more readily, so your furnace, air conditioner or heat pump won’t have to work as hard to ventilate the house. This makes for more efficient operation and lower energy consumption.
  • Performance – When your HVAC system does not have to work as hard to push air through the ductwork, it will perform better. Your home will be more comfortable and better ventilated.
  • Longevity – Because your HVAC system is operating more efficiently, it will be able to perform at a high level for a longer period of time. Well-maintained systems last longer than those that are not taken care of, and cleaning the ducts is part of good HVAC maintenance.
  • Savings – Clean ducts can save you a lot of money over time. Your energy bills will be lower because of how efficiently the whole system is running. And, as an added bonus, your ducts will last longer because of the decreased risk of corrosion and damage from being dirty.
  • Health – Last, but certainly not least, clean air ducts mean clean air, which is important for your health and your family’s health. Especially if you have pets, if you smoke or live with a smoker, or if anyone in the house has allergies or asthma, cleaning your air ducts is a must.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

Is it Cost Effective to Use a Ceiling Fan and AC at the Same Time? A Question From Lemon Grove

Monday, October 10th, 2011

There are a lot of ways to keep your Lemon Grove house cool in the summer, and chances are you’ve incorporated more than one of them into your home already. For instance, ceiling fans are great and can really keep you comfortable in moderately hot weather. But when the heat and humidity really start to pick up, you need something a little more powerful to take the edge off, and that’s usually some type of air conditioner.

One or the Other?

If you’re like most people, you switch off your ceiling fan when the AC comes on. After all, the air conditioner is powerful enough to cool the house on its own. So is it really worth it to expend energy running another, secondary cooling device?

In fact, it is. Ceiling fans in particular use very little energy. Yet they’re quite effective at making your home feel cool and comfortable. So there’s really no reason not to take advantage of their benefits while running your AC.

Cutting Costs

You might be surprised to learn that far from being a waste of energy, using your ceiling fan and AC at the same time can actually save you money. That’s because the cooling power of the fan allows you to turn up the thermostat on your AC unit a couple of degrees without compromising your comfort levels.

And turning up the thermostat on the AC just that small amount will translate into pretty substantial savings on your monthly energy bills. That savings will more than pay for the cost of running the ceiling fan, and you save money.

Better Air Circulation

Running the ceiling fan with the AC on or off is always helpful in terms of promoting good air circulation throughout your house. And the more air circulates, the more comfortable your indoor environment will be. Good air circulation is also important because it helps to minimize the number of air contaminants that build up inside.

More Efficient Heating

The benefits of ceiling fans don’t stop with cooling either. In fact, you can run them in reverse to help maintain even heating in the winter. Essentially, there are few investments you can make that will serve you better throughout the year than a ceiling fan regardless of the other home heating and cooling systems you have in place.

Tags: , , , , , ,
Posted in Energy Savings | Comments Off

Green House Gasses and Air Conditioners: A Tip From Encinitas

Monday, September 26th, 2011

There’s simply no way around it: the air conditioner you probably depend on all summer to keep your Encinitas house cool is emitting some of the greenhouse gasses contributing to the warming of the Earth. While it’s true that the coolants used today, hydrofluorocarbons (HFCs), are much less damaging than the chlorofluorocarbons (CFCs) initially used in air conditioning, they are still harmful to the environment.

Environmentally Friendly Coolants

Recently, research has led to the development of more environmentally friendly coolants. One in particular, HFO-1234yf, is scheduled to be introduced for use in the air conditioning systems of all GM cars beginning with the 2013 models. This is a step in the right direction, but much more needs to be done to address this growing problem before it’s too late.

Electricity and Carbon Dioxide

The use of environmentally friendly coolants will only go so far towards curbing the environmental impact of air conditioning. That’s because air conditioners are universally powered by electricity, and electricity is almost universally produced by the burning of fossil fuels like coal. When coal is burned, it generates a great deal of carbon dioxide, a substantial pollutant on its own.

What You Can Do

There are several things you can do if you’re concerned about how your air conditioning usage impacts the environment. First of all, make the switch as quickly as possible to HFO-1234yf or a similarly environmentally-friendly coolant when it becomes available. And remember that the air conditioning in your car counts too.

You can also go a long way towards reducing your contribution to greenhouse gas emissions by keeping your overall energy consumption down. Try relying on other, natural methods of cooling your home as much as possible. And when you do turn on your air conditioner, make sure you use all of the energy being consumed as efficiently as possible.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

How Do EER and SEER Work? A Question From Rancho Bernardo

Friday, September 23rd, 2011

If you’ve looked for a new air conditioner in Rancho Bernardo recently, you probably noticed each unit comes with an EER or SEER rating. The former is for room air conditioners and the latter for central air conditioning units. In both cases, the number is a measure of how efficiently the system uses electricity. Effectively, if you buy a system with a high rating, you spend less on electricity. Of course, there are tradeoffs. The higher rated machines tend to cost much more, so as a homeowner, you’ll have to evaluate how much you can spend now and how long it will take to save money from that investment.

How EER and SEER Are Measured

These numbers are required by the government to tell you, the consumer, how many BTUs per hour the device can use for every watt of electricity drawn. The more BTUs a system can use, the better for your bill.

Let’s say you want to buy a 10,000 BTU system to cool your living room and dining room. A pretty standard number for a single room unit is 11, meaning the 10,000 BTU system would use about 900 watts per hour to run at full capacity. We figure this out by dividing the BTUs (10,000) by the watts (900).

There is a lot of math to do here, so many people simply look for a higher number within their price range. But, at what point is the upgrade really worth your extra money?

Choosing the Right Energy Efficiency Rating

The easiest way to describe this is to compare two similar devices with different EERs:

Air Conditioner 1 Air Conditioner 2
BTUs 12,000 12,000
EER 9 11
Watts 1333 1091
Price $300 $450

In this particular case, we can spend more for a device that is the same size but uses less electricity. The question then is whether that increased expenditure will pay off in the short term. Let’s assume each device would be operated for 10 hours per day for 30 days in a typical summer month. That’s 300 hours of operation. If the average cost per kWh in you are is $0.09, it will take 4 hours for the first air conditioner to consume 1 extra kilowatt of electricity equal to an additional $0.09. If your air conditioner runs for four months out of the year, we know that it will operate for a total of 1200 hours. That means:

[(1200 hrs x 242 watts) / (1000 watts/kw) ] x $0.09/kWh = $26

So, you save roughly $26 per year from that high efficiency unit. With a $150 price difference, you will break even after 6 years (though probably sooner if the price of electricity goes up).

Don’t forget, however, that central systems are a much more efficient option with SEERs of up to 16.5 and much larger BTU areas to cover. The savings there can add up very quickly. If you have any questions, contact your local air conditioning professional.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

« Older Entries