Posts Tagged ‘Heating Maintenance’

Clairemont Mesa Heating Maintenance Guide: Downflow Gas Furnaces

Friday, January 27th, 2012

Proper care of your Clairemont Mesa home’s downflow gas furnace starts with proper installation and continues through routine cleaning and maintenance. But before you can even have a downflow gas furnace installed, you need to make sure it’s the right fit for your home.

Downflow gas furnaces are so named because of the direction that air flows through them. The cooler air is taken in at the top and directed downward, heating up as it travels, and then is expelled through the bottom of the furnace into ducts that feed the rest of the house. Because of this configuration, downflow  gas furnaces are typically installed in attics as opposed to basements.

If you have a basement and you’d rather install your furnace there, then an upflow furnace is probably the better choice for you. However, as many newer homes don’t have basements at all, downflow gas furnaces are growing in popularity and usefulness.

As with any other furnace, it’s important to have a downflow gas furnace professionally installed. This will ensure that the venting system is properly in place and that your house will be heated as effectively and efficiently as possible.

Of course, there are some other things you can do to help your furnace heat your home and keep your energy bills down. For instance, make sure you have proper insulation everywhere, particularly in the attic and crawlspaces where much of the normal heat loss in a home occurs.

You can also make your home more airtight in the winter by sealing up any unused windows and doors with plastic and making sure all storm windows are in place. Basically anyplace that a draft could develop, you could be losing heat and that costs you money. So to ensure that all of the money you’re spending to heat your house is actually going to that purpose, check periodically to make sure your home is still sealed up tight.

Also, just like any other type of furnace, a downflow gas furnace will require regular maintenance to make sure it continues to run efficiently and to replace any parts that may have worn out over time. Having a professional Clairemont Mesa technician come out once a year to carry out this type of service will wind up saving you a bunch of money and can help catch problems before they are able to get out of hand.

Tags: , , , , ,
Posted in Heating | Comments Off

Carmel Valley Furnace Maintenance Guide

Monday, January 23rd, 2012

Depending on its frequency, there are different types of maintenance tasks associated with keeping your automobile in tip top shape. Did you also know there are tasks that can be performed at various intervals to keep your Carmel Valley home’s furnace in peak running condition? Well, there are.

For example, the most frequent maintenance task is checking the filters in your air handling unit. These are often called furnace filters but in reality, they serve the same function to filter air to and from your air conditioner, too. It might be easiest to just call them air filters. The frequency of replacing or cleaning air filters usually depends on the type of indoor environment you live in – like humidity levels, number of household pets or occupants, etc. In general, filter maintenance should occur every one to three months.

A less frequent maintenance task is cleaning the moving parts of the internal mechanism. You may only need to have your furnace cleaned every six months to a year, depending on its use. In some cases you can perform the cleaning yourself or it is included in an annual cleaning as part of a service agreement with a qualified heating and cooling contractor. A furnace can typically run at peak efficiency when it is cleaned on an annual basis.

You can also make it a regular habit of checking the motor bearings and fan belt, too. You can lubricate the bearings and tighten or replace the fan belt on a same schedule as cleaning the moving parts.

Other maintenance tasks related to your furnace, which may require longer interval times include ventilation system cleaning, or more commonly known as duct cleaning. Some homes don’t require this type of maintenance more than every five to ten years – perhaps longer. Unless there are unusually high levels of dust, allergens, or contaminants in the air, most ventilation systems can remain clean for several years.

Of course, you can turn all of your maintenance tasks over to a heating and cooling contractor – and have the most peace of mind.

Tags: , , , , ,
Posted in Heating | Comments Off

What is the Emergency Setting on My Heat Pump? A Question from Mira Mesa

Friday, November 11th, 2011

While installing or inspecting your Mira Mesa home’s heat pump, you may have noticed that little switch or button labeled something like “Emergency Mode.” And then, you probably scratched your head and thought, “what is that for?”

Hopefully, the emergency setting is not something you will ever have to use. But, it is there for a reason, so it’s possible you may have to resort to it at some point. In that case, it makes sense to know what it is first.

The emergency setting on your heat pump interrupts the normal operation of the device. The compressor shuts off, so the heat pump no longer pumps heat from the outside into the home. Instead, the internal heating element is activated. This backup system is designed to provide a sufficient, albeit minimal, amount of heat when the heat pump is not working properly. The idea is that the element can keep your home warm enough while you get the heat pump fixed.

That’s what the emergency setting is, but when would you use it?

It’s not a trick question. As the name implies, you only want to use this setting in an emergency. For example, if the heat pump has frozen and isn’t operating, the best course of action is to switch on the emergency mode and call a Mira Mesa professional to repair it.

You would also want to use the emergency mode when recovering from a power outage. Any time a heat pump is without power for more than thirty minutes the refrigerant can cool and get too thick to properly flow through the coils. Turning the pump back on in this situation can damage it, so instead you would use the emergency mode for a while to warm the refrigerant back up, then return to operating the heat pump normally.

The emergency setting is not to be used in place of a supplemental heating system. If there is an uncharacteristic cold snap, and your heat pump can’t keep up, then it makes sense to use the emergency setting to keep the house warm. However, if you live in a colder northern climate, where temperatures routinely drop below 30 degrees in the winter, you should have a supplemental heating system in addition to the heat pump. Using the emergency heat setting regularly is not a good idea.

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

How to Clean the Parts of a Heat Pump? A Question from El Cajon

Wednesday, November 9th, 2011

It is very important to keep your heat pump clean. It improves efficiency, helps performance and prevents malfunctions. Cleaning your heat pump should be part of your El Cajon home’s maintenance routine in order to keep the house as comfortable and worry-free as possible.

That is all well and good, but how do you go about cleaning the components of your heat pump. It’s one thing to advise you to clean, clean, clean…but it doesn’t do much good if you do not know how. To correct that, here are some tips to help you clean the different parts of your heat pump.

Caution: before doing any maintenance on your heat pump, including cleaning, be sure to turn off the power to the unit. This is a necessary safety measure.

Filters

  • If you use disposal air filters in your heat pump, skip this part. Just make sure to change them regularly, in accordance with the manufacturer’s instructions.
  • To clean air filters, follow the directions of the manufacturer that were included with the filter. This is also a good time to double check that the filters are installed properly.
  • Clean or replace your filters monthly during heavy use seasons, such as the warm summer months and cold months of late fall and winter.

Coils

  • Remove any debris from the outside of the coils and the surrounding area. Sticks and leaves may have accumulated near the outdoor coils, so just brush them away.
  • Using a soft brush attachment, vacuum the exterior of the coils. Take care not to bend or dent the coils.
  • Using a hose with a spray attachment, flush the coils with water from the inside out. This will remove any stubborn debris. Take care not to spray any electrical components, such as the fan or any nearby wires.
  • While you are inside the unit, vacuum the bottom inside to get rid of any more stray debris.

With that done, put everything back, replace the grille covers and power the heat pump back on. It should run smoothly with a fresh filter and no debris to gum up the works. Clean the coils every few months to keep the heat pump in tip top shape.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Four Important HVAC Maintenance Tips from Escondido

Monday, October 24th, 2011

Do you have a “mental checklist” of chores that need to be done a regular basis around your Escondido home, such as cleaning the window treatments, washing windows, shampooing rugs, etc.? There are various areas of your home that need regular maintenance and cleaning – and that list includes your heating and cooling (HVAC) equipment. Do you know a poorly operating furnace can cost you in increased energy usage and higher utility bills? That same poorly operating furnace can be discharging harmful carbon monoxide gas into your home, creating a health risk.

So, it is important to keep your furnace in peak operating condition and the best way to do that is by making a checklist of HVAC maintenance tasks. Let’s look at four of them.

  1. Check your filters. Routine replacement of your furnace filters should be every 1-3 months, depending on the indoor air quality of your home, number of occupants, size, etc. You can purchase disposable filters online, at a local “big box’ retailer, or from your local HVAC contractor. A visual inspection of your filter is the best way to determine if it needs replacing. If you have a removable electronic filter, it should be cleaned every few months using soapy water and a hose. Any restrictions to air flow through the filters can lead to poor indoor air quality and will cause your furnace to work even harder to circulate warm air through your duct system.
  2. Clean and insect the blower assembly and motor. You can do this with a vacuum. Also check the fan belt to make sure it is not too loose or if it has any cracks or splits.
  3. Look for any obstructions in vents and returns. Believe it or not, your furnace needs “help” to operate. Any build-up of dirt or debris around the grilles of your ventilation system will just make your furnace work a lot harder. Do a visual check inside and outside and pay special attention to flues and chimneys, where indoor air is exhausted. Any blockage can result in an accumulation of poisonous carbon monoxide gas.
  4. Keep the area clean and clear around your furnace and water heater. Never store flammable liquids near your heating equipment. Your furnace room is not a storage closet.

Tips 1 and 2 relate directly to furnace maintenance but tips 3 to 5 are equally important, having a direct bearing on how your furnace performs and its ultimate efficiency. If you follow all four tips and have an annual inspection from a qualified HVAC contractor, you should enjoy a fall season of comfort, warmth, and safety.

Tags: , , , , ,
Posted in Heating, Indoor Air Quality | Comments Off