Posts Tagged ‘La Mesa’

What is the Emergency Setting on My Heat Pump? A Question from Mira Mesa

Friday, November 11th, 2011

While installing or inspecting your Mira Mesa home’s heat pump, you may have noticed that little switch or button labeled something like “Emergency Mode.” And then, you probably scratched your head and thought, “what is that for?”

Hopefully, the emergency setting is not something you will ever have to use. But, it is there for a reason, so it’s possible you may have to resort to it at some point. In that case, it makes sense to know what it is first.

The emergency setting on your heat pump interrupts the normal operation of the device. The compressor shuts off, so the heat pump no longer pumps heat from the outside into the home. Instead, the internal heating element is activated. This backup system is designed to provide a sufficient, albeit minimal, amount of heat when the heat pump is not working properly. The idea is that the element can keep your home warm enough while you get the heat pump fixed.

That’s what the emergency setting is, but when would you use it?

It’s not a trick question. As the name implies, you only want to use this setting in an emergency. For example, if the heat pump has frozen and isn’t operating, the best course of action is to switch on the emergency mode and call a Mira Mesa professional to repair it.

You would also want to use the emergency mode when recovering from a power outage. Any time a heat pump is without power for more than thirty minutes the refrigerant can cool and get too thick to properly flow through the coils. Turning the pump back on in this situation can damage it, so instead you would use the emergency mode for a while to warm the refrigerant back up, then return to operating the heat pump normally.

The emergency setting is not to be used in place of a supplemental heating system. If there is an uncharacteristic cold snap, and your heat pump can’t keep up, then it makes sense to use the emergency setting to keep the house warm. However, if you live in a colder northern climate, where temperatures routinely drop below 30 degrees in the winter, you should have a supplemental heating system in addition to the heat pump. Using the emergency heat setting regularly is not a good idea.

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

Allergens: Regular Duct Cleaning Will Reduce Them in San Diego

Monday, October 17th, 2011

One of the biggest problems many families face with indoor air quality in San Diego is the ever persistent presence of allergens. Especially if you have pets or plants, allergens will be in your home from the day you move in. But, that doesn’t mean there aren’t many ways to reduce them – especially in the case of duct work.

Allergens in Your Duct Work

How do so many allergens get into your ductwork? It starts with how the ductwork circulates air in your home. Because air only flows one way and because the ducts are not being used continuously, the air circulated by your air conditioner or furnace leaves behind all sorts of unwanted residue.

In both cases, the air drawn into your comfort system is usually the same air from inside your home. That means it is full of things like dust, pollen, dander and more. Even if the air is drawn from outside, often the case with an air conditioner unit, there are plenty of allergens outside.

How do you stop all of these allergens from working their way into your home and then your lungs? It starts with regular cleaning. You can’t ever truly stop allergens from coming inside or circulating in your air ducts, but you can take big steps in removing many of the contaminants that linger in your ducts.

Annual cleaning of the ducts by a professional will remove excess build up in places you cannot normally reach. Between those cleaning visits, you should supplement the cleaning by dusting and vacuuming vents and the areas of your ducts you can reach.

Going Beyond Cleaning

Cleaning your ducts is a great way to reduce allergens in the house. That alone, along with quality ventilation will take care of the most common allergens. However, if people in your home suffer from asthma or more severe seasonal allergies you may want to upgrade your preventative measures with an air filtration and purification system.

An air filter alone, equipped with a HEPA filter, is capable of removing particles and allergens as small as 0.3 microns – far smaller than dander, pollen or dust. For those with more advanced allergies or too many outdoor contaminants, a purifier works wonders by removing excess gas, smoke, or mold from the air with ionization.

Whatever your concerns, it is possible to live comfortably in your home despite allergies. Stay on top of cleaning and get your air tested to see if filtration will help. From there, you can remove almost anything.

Tags: , , , , , ,
Posted in Indoor Air Quality | Comments Off

Who Invented Air Conditioning? A Question From La Mesa

Friday, October 7th, 2011

For hundreds of years, people have been trying to figure out how to stay cool in the heat of the summer. But it wasn’t until 1902 that the first modern air conditioner was put into service in Brooklyn, NY. Since then, many adjustments and improvements have been made to make air conditioning available and convenient for people to use in their La Mesa homes and cars. But through it all, the basic principles used in that first air conditioner have remained constant.

The Sackett-Wilhelms Lithographing and Publishing Company

The heat and humidity in New York in the summer isn’t something to be taken lightly, but it posed particular problems for the owner of the Sackett-Wilhelms Lithographing and Publishing Company. The conditions inside his facility were such that the paper used was warping and the dimensions fluctuating, causing the printing to constantly come out misaligned.

To try and solve this problem, he hired the Buffalo Forge Company, which itself had just hired Willis Haviland Carrier, a recent recipient of a Master’s Degree in Engineering from Cornell University. Carrier approached this problem by trying to find a way to cool air by passing it over cold coils in the same way air was heated in those days by passing it over hot coils.

As it turned out, this process worked to reduce both the temperature and the humidity in the area and Carrier’s first air conditioner began running at Sackett-Wilhelms in July of 1902.

The Next Steps

As the potential for this new technology became more and more apparent, demand for Carrier’s device grew in all sectors of the economy. Employers were delighted by the way air conditioners increased the productivity of their workers during the hottest months of the year, and in order to keep up with demand, Carrier eventually founded the Carrier Air Conditioning Company which still exists today.

The coolants used in the earliest air conditioners were generally either highly flammable or toxic, and often both. In order to make air conditioning safer and easier to use, a safer coolant needed to be introduced, which was what drove Thomas Midgley, Jr. to develop Freon in 1928. Freon was initially made up of chlorofluorocarbons (CFCs), but as the disastrous environmental impacts of those chemicals became apparent, usage shifted first to hydrogenated chlorofluorocarbons (HCFCs) and then to the hydrofluorocarbons (HFCs) that are predominantly used today.

If you have any questions about modern air conditioners, talk to your local contractor.

Tags: , , ,
Posted in Air Conditioning | Comments Off

Variety of Ways to Cool Your Temecula Home Naturally

Friday, September 9th, 2011

It is normal these days to simply switch on the air conditioning when the temperature begins to rise outside in Temecula. But this can get expensive quickly, so it is a good idea to look into some alternative cooling methods as well. Fortunately, there are actually some great ways to help keep your home cool without touching that air conditioning at all. You will probably still want to have it around for extreme circumstances, but the less you need to use it, the more you will save in the long run.

Using fans, ceiling fans in particular, can certainly help to keep you cool on many moderate summer days. But they are far from the only options available. In fact, the design and composition of your house itself will have a lot to do with how easy it is to keep it cool all summer long.

One of the main reasons that your house gets so hot inside during the summer is that sunlight heats the air inside when it hits the walls, roof and windows. Closing your blinds will help to keep some of this out, but there will still be plenty of heat from the sun working to increase the indoor temperature.

What you really want to do to keep your house from heating up because of sunlight is to actively reflect the sun’s rays away from your home. You can do this by having light colored roofing and exterior paint or siding put on. While the dark colors typically used for this type of work absorb the vast majority of the sunlight that hits them, lighter colors will reflect it away.

This works well for the walls, but on your roof it can be a bit more difficult to stop the absorption of heat from the sun because of the nature of typical roofing materials. What you can do, however, is add a reflective coating like white latex on the roof. This will dramatically reduce the amount of heat that is able to come into your home in this way.

Also, natural shade can do a lot to keep sunlight from getting to your home to begin with. Planting trees close enough to your home that they will block out the sun but far enough away that they have room to grow will eventually help to keep your home much cooler without any extra work whatsoever. If you have more questions about the best ways to keep your house cool, contact your local HVAC contractor.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

What Features Should I Look for When Buying an Air Conditioner in Lakeside?

Wednesday, August 31st, 2011

There are so many different types and styles of air conditioners on the market these days in Lakeside, it can be difficult to figure out what features are worth paying attention to when it comes time to buy one for yourself.

Of course, the most important thing to do is make sure you get an air conditioner that’s appropriately sized for the space you’re trying to cool. But what should you look for beyond that? Here are a few features you might like to have on the unit you purchase:

  • Energy Efficiency – The more energy efficient your air conditioner is, the less your cooling costs will be. It’s as simple as that. So when you’re evaluating devices, remember that it’s worth paying a little bit more up front for a more energy efficient unit. It will save you money in the long run and you’ll be doing your part to help the environment.
  • Dehumidification – Just about every air conditioner controls humidity to a certain extent in addition to cooling. But some do this better than others. There are also air conditioners with separate dehumidification settings for those days that are more humid than hot. Even when you need both cooling and dehumidification, it’s nice to have control of each of these independently.
  • Timer – Being able to program your air conditioner to switch on and off at different times of day is more than just convenient; it will save you money. You don’t want to leave your air conditioner running all day when you’re not home, but it sure is nice to come home to the comfort of an air conditioned space. If your air conditioner has a timer, you can have both. Just set the unit to come on a half hour or so before you get home and you’ll enjoy cool, refreshing indoor comfort right when you get home without paying through the nose to keep your home cool when no one is there.
  • Easy-to-Use Controls – As simple as this one seems, you might be surprised at how inconvenient the controls on some air conditioners can be. So when you’re evaluating your options, make sure you research how easy each unit is to operate. This can definitely save you from plenty of frustration in the long run.

Air conditioners come in many different shapes and sizes. To make sure your decision works best in your home, do your research well in advance.

Tags: , , ,
Posted in Air Conditioning | Comments Off

How to Reduce the Load on Your Central Air Conditioner: Some Pointers From Sorrento Valley

Monday, August 22nd, 2011

Your central air conditioner can handle a lot. It can keep your Sorrento Valley house cool and comfortable all summer long with only a minimum of maintenance. And if you have a newer, more energy efficient model, you probably are not even paying very much for this luxury. But no matter how good your air conditioning system is, it is always best if you can reduce its cooling load as much as possible.

Cutting down on the amount of work your central air conditioner has to do will save you money both in the short term and in the long term. You will be able to keep your house cool all summer while paying even less than you already do and you will help to extend the life of your system as well.

In general, reducing the cooling load that your air conditioner is responsible for involves keeping your house cooler by some other means. One great option when this is your goal is to have some ceiling fans installed. These help to circulate cool air and also create a breeze that can make it feel cooler even if the actual indoor temperature is the same.

With adequate ceiling fans in place, you will usually be able to turn up the thermostat on your central air conditioner and still be completely comfortable indoors. Turning up the temperature on the thermostat means that your air conditioning system will not have to work so hard because it will not have to get the indoor temperature down so low.

You can also reduce the indoor temperature in your house by blocking the sunlight that comes in and warms up the indoor air. Drawing the blinds, especially in those rooms that receive warmer afternoon sunlight will keep that sun from raising your indoor temperature. This, in turn, means that your air conditioning system will not have to work so hard to get the temperature back down.

You can also help to keep cool air inside and warmer air out by covering any doors and windows you are not likely to use with plastic. Also, check to make sure there are no cracks or drafts anywhere that may be letting in air from the outside or allowing cooler indoor air to escape. All of these things can make it possible for your air conditioner to keep your home cool without working so hard, and that will also mean that you will be paying less each month on your energy bills.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

Why Install a Bathroom Ventilation Fan?

Monday, July 11th, 2011

Your bathroom is one of the dampest rooms in your house. Without proper ventilation, you put it at risk of developing mold and mildew which can then spread and enter your home’s air supply. But, what kind of ventilation fan is best and how will it help you remove those unwanted allergens?

Choosing a Ventilation Fan

Step one is to find a ventilation fan that will remove excess humidity and moisture from your bathroom. When you take a shower, wash your face or run a bath, not only do you fill the room with a lot of water, you heat it up. With nowhere to go, that heat lingers and everything from tiles to wood fixtures will absorb the moisture. Over time, it leads to mold and mildew growth – some of it damaging to your bathroom, and much of it damaging to your health.

A ventilation fan must be efficient in removing the excess humidity in your bathroom and pushing it outside. But, that ventilation fan shouldn’t make your bathroom too cold or waste a great deal of the heating or cooling energy you pay so much for.

The best solution then is to get a fan that either connects to a central exhaust system to remove the humidity and air from your bathroom or use an energy recovery ventilator to keep the warm or cool air where it belongs. These systems will remove only the stale air filled with humidity and allergens.

Integrating with the Rest of Your Home

You can have a simple bathroom fan placed in your home that just blows air out of the room. This is effective and will reduce the risk of things like mold and mildew, but it’s costly to operate due to energy loss and it doesn’t integrate with the rest of your home well.

That’s why a good fan should be part of a larger exhaust and ventilation system. The type you need depends largely on the overall humidity of your home and your annual heating and cooling costs, but generally, a simple system that exchanges heat before air leaves your home will do the trick.

Most modern homes have bathroom ventilation already installed. If yours does not, take a closer look at the options currently available. You’ll find different sizes, types and brands designed to fit your particular needs. Whatever you choose, simple ventilation can do wonders for a previously damp and mildew filled bathroom.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

How Do I Find the Right Size Unit for My Room?

Wednesday, June 15th, 2011

When buying an air conditioner, there are a lot of things you need to take into account. One of the most important is the size and power of the unit you choose. Air conditioners come in many different sizes, so if you really want to get the most out of your purchase, you need to do your research and pick one that fits your home like a glove.

Square Feet and BTUs

The best way to determine how large of an air conditioner you need is to match the number of BTUs the unit has to the square footage of the room you want to use it in. That means you need to know what room you’re buying it for before you make your purchase.

The number of BTUs needed goes up proportionately with the room size, so even if you don’t have exact measurements or if your room is oddly shaped, you can get a good idea of how large an air conditioner you need. For instance, a 400 to 550 square foot room is best served by an air conditioner with between 8,000 and 11,000 BTUs, while a room that’s only 250 square feet would probably be fine with a 6,000 BTU unit.

Bigger Isn’t Always Better

One of the most common mistakes people make when buying an air conditioner is to assume that the bigger the unit the better it will work. The truth is that buying an air conditioner that’s too big for your room is just as much of a waste as buying one that’s too small.

A larger air conditioner will cost more, and it will probably make the room too cold. It will also cycle on and off more frequently than a properly sized unit and it won’t be able to properly control the humidity level, leaving you with a cold, damp environment. That’s not very comfortable.

Other Factors

The square footage is definitely the most important piece of data you’ll need before buying a new air conditioner for any room in your house. But don’t forget to take some other factors into account as well. For instance, if the room has particularly high ceilings or receives a lot of direct sunlight, you’ll probably need a slightly more powerful unit than the straight square footage would indicate.

If you’re not sure how certain features of your home will impact your buying decision, call a professional who can help you get a more exact idea of what it will take to stay cool.

Tags: , , ,
Posted in Air Conditioning | Comments Off

How Much Will a High Efficiency Air Conditioner Save You?

Wednesday, June 8th, 2011

When it comes to your air conditioning system, the energy efficiency rating really does matter. While you may be paying a bit more for products with higher energy efficiency ratings to begin with, you will certainly save a significant amount on your monthly cooling bills in the years to come.

Before you can evaluate your options in terms of energy efficient air conditioners, however, you will need to know how their efficiency is represented. Most air conditioners come with what is called a seasonal energy efficiency rating (SEER). A higher SEER means a more energy efficient model, and likely a higher price tag as well.

But how much more energy efficient is a SEER 10 air conditioning unit as opposed to a SEER 11? Well, the truth is that it is about 7% more efficient. However, a SEER 14 will be 23% more efficient than a SEER 10, but only 5% more efficient than a SEER 13 model.

While all of these numbers can help give you some context in which to evaluate the various air conditioners out there, they can only go so far. Turning these percentages into dollars is what you really have to do when you are trying to figure out what your monthly or yearly savings will be.

So to give you a bit of perspective, imagine that your annual cooling costs come to around $480 with your current SEER 10 air conditioning system. If you choose to upgrade to a SEER 13, you will save somewhere in the neighborhood of $110. But if you opt for the SEER 14 instead, you will gain an annual savings of closer to $140 compared to your current bill.

Of course, the SEER of a particular air conditioner is not the only thing that will cause the price of the unit to rise, nor is it the only thing that can cause your monthly cooling costs to rise. Air conditioners also need to be matched to the size of the space they will be asked to keep cool.

If the unit you have is too small to effectively cool the area in question, you are likely paying more than necessary in terms of cooling costs for less than ideal results. Similarly, if your unit is too big, you will be paying too much no matter how high a SEER rating it has.

Tags: , , ,
Posted in Air Conditioning | Comments Off

Tips for Upgrading Your Central Air Conditioner

Monday, May 30th, 2011

When the time comes to upgrade your central air conditioner, you will have a lot of things to take into account. If you were generally satisfied with the performance of your old system, it can be very tempting to stick with a similar model. But if you do not examine all of the options out there right now, you may very well be missing out on a great deal.

If you already have a central air conditioner in place, chances are that you also have ductwork throughout your house. In that case, you will probably be better off with a packaged air conditioner as opposed to a split system. If it is a split system you are replacing, however, you should probably keep your search limited to other split systems. Installing a packaged air conditioner when you do not already have ducts in place can dramatically increase the overall cost of the project.

You will also want to make sure that the system you choose is compatible with the heating system and air handler that you already have in place. Most central air conditioning systems can be integrated easily with all types of heating systems, but you should still check to make sure this will not be a problem, particularly if you have an older heating system.

In terms of picking out the right new system for your home, energy efficiency is probably the main factor to consider. While just about every air conditioner on the market right now will be much more efficient than the unit you are replacing, you want to make sure you get a model that will provide you with the optimal savings in the long run.

This does not necessarily mean that you should go out and buy the most energy efficient air conditioner out there. In fact, because the more energy efficient units are also typically more expensive, you may not actually save money by going that route. But you will do well to choose a unit that will save you enough monthly to offset the installation costs and for most people, that means that you will want an air conditioner that is either a SEER 14 or SEER 16.

Of course, the actual amount of money you will save as you move up through the SEER rankings depends on how much you use your air conditioner to begin with. If you live somewhere with very hot weather and you use your unit for a large chunk of the year, it may very well be worth it for you to opt for a very high efficiency model.

Tags: , , ,
Posted in Air Conditioning | Comments Off