Posts Tagged ‘Miramar’

How to Replace a Thermostat in Your Miramar Home

Friday, December 16th, 2011

There are a lot of common household tasks that do-it-yourselfers can handle beyond changing light bulbs or replacing a fuse in their Miramar homes. One of those is changing out a thermostat. The reasons for replacing a thermostat can vary from making an upgrade to changing out a thermostat that is not working right – or at all. Whatever the reason, the task is pretty simple and require s very little time and very few tools.

Let’s set the stage.

The materials you will need are the replacement thermostat, wire connectors, electrical tape (optional), needle nose pliers, and a screwdriver.

Here are the steps:

  1. Turn off electrical power to the existing thermostat. You can do this by flipping a breaker switch or removing a fuse from your home’s electrical panel. This would be a good time to make a note of the circuit’s location, writing the circuit number on the panel door or using a sticker.
  2. Remove the cover from the existing unit. You should be able to locate the screws that hold it to the wall mounting plate. Remove the screws and pull the unit away from the wall and mounting plate. Be careful not to touch the electrical wires together on the thermostat.
  3. Disconnect the wiring. Carefully remove the electrical wiring from the unit and keep the wires apart. You might want to tape the bare ends and also ensure that the wires don’t fall back through the wall. If the wires are not color coded, mark each one and which terminal they were removed from. Remove the mounting plate.
  4. If you are using a new mounting plate, make sure it fits over the existing hole and then pull the wires through the opening of the plate. Make sure the mounting plate is secured to the wall with the proper screws.
  5. Now match the wires to the terminals on the new thermostat. The wires are usually color-coded but if not, make sure you attach the right wires to the corresponding numbered terminals on the next thermostat. A green wire, which operates the furnace fan blower, is connected to the “G” terminal. The white wire operates the heater and attaches to the “W” terminal. The yellow wire operates the air conditioner and connects to the “Y” terminal. Use a wire nut to secure the wires and keep them apart from other wires. Ignore any other wires coming out of the wall as they are not necessary and may have been added by the original builder for other purposes.
  6. Carefully move the wires back into the wall as you line up the new thermostat on the mounting bracket. Install the new bracket and secure the thermostat to the bracket.
  7. Turn your power back on and check your thermostat by setting the temperature high or low, to engage the furnace or air conditioner.

This simple procedure can be done in less than 10 minutes. But if you have any doubts and want greater peace of mind, call a professional heating and cooling contractor to perform the installation.

Tags: , , , , ,
Posted in Heating | Comments Off

What is Ductwork and How Do You Maintain It? A Guide From Lemon Grove

Friday, September 16th, 2011

Most first time homeowners in Lemon Grove are aware of the importance of their heating and cooling systems. They keep you comfortable throughout the year, pumping heated and cooled air into every nook and cranny of your home. However, there is another system in your home that actually makes it possible for those other two systems to work. And while they are incredibly simple, your ducts must be carefully maintained year after year to avoid heat and cooling loss.

How Ducting Works

Ducts are installed throughout your home to deliver conditioned air from your air handler. The air is pumped into the ducts and directed by your thermostat system to where it is currently needed. Vents are opened or closed to release that heat or cooling and the house is properly tempered. Ductwork is usually made of sheet metal, though some flexible ducting is made with a combination of plastic, thinner metals and fiberglass.

Ideally, ductwork is crafted in such a way that it is air tight and able to deliver large volumes of air to any room of your home for decades to come. However, whether because of improper installation or extreme conditions, sometimes those ducts can come loose or gaps will form. When this happens, maintenance and repair are needed.

How to Maintain Your Ducts

To maintain ductwork, you must first have it cleaned once a year. Sometimes, this may be necessary more frequently depending on how often you use your home comfort system and how big your home is. Effective duct cleaning will remove any excess debris and dust and kill mold that has started to grow. High humidity can be controlled with a dehumidifier in your air handler and is highly recommended for all ductwork systems.

Additionally, you should have your ducts checked for leaks and gaps periodically. This will reduce the chance that your ductwork starts to leak anything out of the house or between rooms. Such leaks cost you money and put undue stress on your HVAC system. Overall, a good ductwork system is one that you never have to think about. Regular maintenance makes that possible.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

Why Install a Ductless Air Conditioner? A Question From Otay Mesa

Monday, August 29th, 2011

As you explore your options in terms of a new home air conditioning system in Otay Mesa, you will probably have to decide whether you want a system that uses ducts to get the cooled air around the house or one that is considered ductless. Each type of air conditioning system is appropriate in certain situations, so it is important to understand the benefits of each before you can make a decision.

Duct air conditioning systems are the more traditional type on the market today. They generally consist of an outdoor compressor and condenser unit and an indoor air handler. The outdoor unit passes the cooled air through ducts to the air handler, which then takes over circulating the air through the house and back out to the condenser again.

It makes sense to install this type of air conditioning system if you have a large house or if you have ducts already in place. Duct air conditioners can cool a moderate to large sized house quite effectively and they can also be coupled with zone control systems to give you multiple climate zones within your house.

Ductless air conditioners, as their name suggests, do not rely on a system of air ducts to get cooled air distributed throughout your house. These types of systems use refrigerant lines to transfer coolant from the outdoor compressor to the indoor, wall mounted units. Each of these indoor units can take care of cooling one or two rooms, but in order to cool an entire house with one of these systems, you will need to install multiple indoor units.

However, these multiple indoor units can all be connected to the same outdoor compressor, and they can also be controlled independently. That gives you much greater control over which parts of your house are cooled and how much energy you are using to cool areas that may or may not be occupied.

Ductless air conditioners are generally more energy efficient than ducted ones, but their real advantage comes from the facts that they can be installed even in places where air ducts do not exist or cannot go. If you do not already have ductwork in your house, installing a duct system will add considerably to the price of installing a ducted air conditioning system. In a case like this, a ductless system is much easier and cheaper to install and certainly makes more sense.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

Alternatives to Air Conditioning in Your Miramar Home

Wednesday, August 24th, 2011

Let’s face it – we rely pretty heavily on air conditioning to keep us comfortable during the warmest months of the summer in Miramar. So, what do you do when the mercury dings 90+ and your air conditioner is either broken or you are in a place without AC? Luckily, there are alternatives. Here are some of the better options:

  • Move Air through the House – As simple as it sounds, air circulation can have a huge impact on the temperature inside, especially in the late afternoon. Mid-afternoon sun will hit your roof no matter how many trees you have planted. The result is a decent amount of heat pouring into your home. But, if you open the windows and let a cross breeze through, amplifying it with fans, especially ceiling fans, moving air will carry that heat out of the house later in the day when the temperature drops.
  • Block Direct Sunlight – Unless it’s 90+ degrees outside, most of the discomfort in heat comes from direct sunlight. Block that direct sunlight and you severely reduce how warm it might get in your home. Trees planted along western, eastern and southern walls do this very effectively, especially if they are deciduous and will allow in the warming sun in the winter.
  • The Power of Water – Feel warm? Get some cool water and place it on your forehead, arms or legs. A bowl of cool water in front of a fan can be soothing as well, assuming humidity isn’t a problem. If it is, consider getting a dehumidifier to run in lieu of an air conditioner for those days that aren’t too hot. They are less expensive and can reduce discomfort significantly.
  • Evaporative Coolers – Evaporative coolers are extremely popular in Europe and Japan where energy costs are relatively high. They use up to 80% less electricity than air conditioners, don’t require refrigerants linked to global warming, and they work extremely well in dry heat. There are evaporative coolers available that can cool your entire home, though the most common devices are those designed for a single room. They are sometimes called “swamp coolers” as well.

I’m sure we’d all rather have a comfortably air conditioned room to lounge in during the hottest months of summer, but in lieu of electric powered comfort, keep in mind the simple, effective ways people have been staying cool for centuries.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

How to Stay Affordably Cool This Summer

Monday, July 25th, 2011

Putting in a high quality, energy efficient air conditioning system is a great step to take when you are trying to keep your house cool and comfortable all summer without paying a fortune in cooling costs. Many of the latest air conditioners are able to use very little energy to provide powerful cooling power to your house no matter how big it is.

But if you are really serious about keeping cool and keeping costs down, there are plenty of other things you can do to give your air conditioning system a hand. It might seem silly, but putting in a little bit of effort around the house can save you quite a bit in the long run.

For instance, since you are paying to keep the air in your house cool, it is a good idea to make sure that the air you are cooling stays in your house. Sealing off unused doors and windows with plastic is an excellent precaution to take to ensure that no cooled air leaks out through the cracks and door jambs. Also, you will want to check for any other openings that could create a draft and allow cool air to escape or warm air to get in.

However, just letting in air from outside in the summer is not the only way that the heat can get in. The sun is powerful in the summer and the more you can block of it, the cooler your house will be. So make sure that your blinds are closed to block out the sun, particularly in the afternoon. Morning sun is not nearly as powerful as the sun you get towards the middle and later part of the day.

All of these steps will help to take the pressure off of your air conditioning system and allow it to get its job done with a minimum of energy expended. And that will certainly save you money every month. You can save even more, though, by adjusting the temperature on your thermostat a bit as well.

Most air conditioning systems are set to a default temperature of 72°F. While this is probably quite comfortable for you, it is likely that you would be equally as comfortable at 75°F. In fact, you probably will not even notice the difference. But that small adjustment can actually save you quite a bit on your monthly cooling bills.

Tags: , ,
Posted in Air Conditioning | Comments Off

Understanding House Ventilation Options

Monday, July 4th, 2011

All the fancy air quality control tools in the world are useless if you don’t have a good ventilation system to circulate air through your home each day. An air filter removes larger particles like dust, dander and pollen, and an electronic air filter removes smaller particles like bacteria, mold, and gases. However, your indoor air will still be poor without a fresh supply of air constantly circulating in from outdoors.

Types of Ventilators

There are a few options here, depending both on the number of contaminants your home has and the amount of heated or cooled air you are willing to lose each day through vents.

The simplest method is an exhaust fan. Fans blow air from your home, creating a negative pressure zone inside. Air inlets then allow new air to enter your home and equalize that pressure. There are also balanced exhaust fans – one fan blowing indoor air out and another fan pulling fresh air in. If you have open flames or gas burning appliances, a balanced exhaust fan is necessary to keep the flames from going out due to the negative pressure caused by a single outlet exhaust fan.

Traditional ventilation, while simple, is also inefficient. In the middle of winter it blows all of your heated air outside and in the summer, it does the same to your cooled air. Your home comfort system likely can keep up with the loss of heat or cooling, so you won’t be less comfortable, but you will certainly pay more on your energy bill.

That’s why heat and energy recovery ventilators are popular in many homes. Especially if you went to the trouble of having your home sealed up tightly to minimize energy loss, these ventilators will save you money.

When air is ventilated through a recovery unit, the energy and heat is transferred between indoor and outdoor air as it passes. In the winter, this means the energy in your indoor air is retained and during the summer, the energy in outdoor air is removed before it enters your home.

Which Method is Best?

The method you choose will depend largely on your current cost of heating and cooling and what types of contaminants you face. Energy recovery ventilators have the added benefit of patching directly into your indoor air quality units, so you won’t need to worry about new contaminants coming in either.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

Warning Signs: When to Call for an Air Conditioning Service

Wednesday, June 1st, 2011

The last thing you want is to be without an air conditioner during the hottest days of the year. Ideally you would never have to call for service to repair your air conditioning system, but just like anything else, your air conditioner will break down once in a while. However, you can dramatically reduce the inconvenience and cost of emergency air conditioning repairs if you are able to spot the warning signs of a problem before it shuts down your system completely.

For instance, all air conditioners make noise, but if your air conditioning system is suddenly making much more noise than it used to, chances are that something in there is not working properly. Calling for repairs when you notice this sudden increase in noise from your system will greatly increase the chances that the repair will be relatively minor and that you will not have to go without air conditioning when you need it most.

Also, it is a good idea to call for service if your air conditioning system does not seem to be doing as good a job as it used to when it comes to cooling your home evenly and effectively. Uneven cooling is a good sign that something is not working right within your system. And even if your air conditioner continues to work, it will probably be using up more energy than necessary for a less than ideal end result.

Along these same lines, a noticeable increase in humidity in all or part of your home is another good indication that something is wrong with your air conditioning system. Air conditioners both cool and dehumidify the air, so if yours stops removing humidity properly, you need to find out why.

In fact, even if you do not notice any difference in the way that your air conditioner is performing, you can still spot a problem if you keep a close eye on your energy bill. If you see a sudden increase in the amount of your bill because of the amount of energy that your air conditioning system is using, it is a good sign that something is not working right.

It may be tempting to put off calling for repairs, particularly if your air conditioner is still able to keep your house comfortable. However, it will likely be much cheaper and more convenient to have the repairs done early rather than waiting until the unit breaks down entirely.

Tags: , , ,
Posted in Air Conditioning | Comments Off