Posts Tagged ‘Rancho Bernardo’

Money Saving Tips in Del Mar: Heat Your Crawl Space

Monday, April 30th, 2012

If you’re like most people in Del Mar, you probably focus on how to keep the living areas of your home warm and comfortable in the winter months. Of course, you want to do this with as little expense as possible and so installing heating systems and insulation in all of the rooms of your home naturally makes sense. The main goal of this is to eliminate any areas where heat might be able to escape, thereby causing you to spend more and run your heating system for longer to keep the temperature indoors at an acceptable level.

What you might not often think about, however, is the fact that the crawlspace under your floors is probably not insulted at all. Of course you and your family don’t spend much time there, but if you’re trying to keep your home comfortable for as small a price tag as possible, this is something you should think about addressing.

There are actually several reasons that heating and insulating your crawlspace can save you money in the long run. For one thing, the ducts and pipes that carry your heated air and water to various locations throughout your house generally run right through these very crawl spaces. Even with an average amount of insulation surrounding those pipes and ducts, you’ll still be losing heat to the outdoors as the air and water travel through the crawl space.

Of course, pumping heat directly into the crawl space would be a waste too, since there is no insulation to keep it there. With the proper amount of insulation, however, you can easily heat your crawl space with very little energy and potentially save a ton in the long run.

When your ducts and pipes are traveling through a heated space, they’ll retain the heat they started with and bring that to the rest of your home. You’ll pay very little to keep the crawl space warm and you’ll save a lot by conserving the heat and hot water that you do generate to keep your house comfortable.

Plus, because your crawl space is generally located directly underneath the floor, you’ll be protecting the actual rooms of your home from heat loss as well. And you floors won’t be so cold to walk on either. Overall, there really is no reason not to take the time and have your crawl space properly insulated and heated.

Tags: , ,
Posted in Heating, Heating Systems, Installing Heating Systems | Comments Off

Lemon Grove Heat Pump Repair Question: Why Won’t My Heat Pump Start?

Wednesday, January 25th, 2012

If you are having trouble with your Lemon Grove home’s heat pump, you may be surprised to learn that it is probably not the heat pump that is to blame, especially if the trouble is that it simply won’t start up. That seems counterintuitive, but it’s true: the heat pump can be in perfect working order but still not turn on.

The good news, then, is that your heat pump is fine and you won’t have to pay an arm and a leg to fix or replace it. Still though, these types of problems can very frustrating to diagnose and correct. Here are four common culprits when a heat pump won’t start:

  1. No power to the heat pump. Check your breaker box to see if the circuit breaker was tripped. If so, reset it and see if that fixes the problem. Another possibility is that your heat pump is wired to a wall switch, or that there is a switch on the unit itself. Make sure the switch is turned on.
  2. Make sure the thermostat is set to the proper mode, such as “heat” mode if you desire more heat. It seems overly simple, but sometimes the trouble is as simple as that.
  3. A recently replaced thermostat. If you recently upgraded or replaced the thermostat in your home, it’s possible that something went wrong that is preventing your heat pump from starting. It may be the wrong kind of thermostat – heat pumps require a specific type – or it may have been improperly wired.
  4. Finally, the heat pump may have its own circuit breaker on the air handler cabinet. This is often the case with heat pumps that have supplemental electric elements. If that breaker is tripped, that could cause the problems you are experiencing.

If you exhaust these problems and the problem persists or recurs – for example, if the circuit breaker trips again – call a contractor to work on your heat pump. There may be something larger at work that is causing problems in the electrical system that controls your Lemon Grove home’s heat pump, and that requires some expertise to properly address.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Do I Need to Supplement My San Marcos Heat Pump with Another Heating System?

Friday, January 6th, 2012

People often turn to heat pumps in San Marcos as a solution for their home heating and cooling needs because they want a single, all-inclusive system that covers all the bases. The convenience and simplicity is part of the allure of choosing a heat pump to begin with.

However, it’s not always that simple. There are situations where a heat pump is not enough to handle the needs of the whole home. This doesn’t necessarily mean that the whole idea goes out the window, but the heat pump may need some help in the form of a supplementary heating supply.

Here are some reasons/situations that may call for a supplemental heat source in addition to a heat pump:

  1. A Cold Climate – Although heat pumps can serve as the primary heating system when temperatures drop as low as 30 degrees Fahrenheit, they have trouble keeping up when the cold snap lasts longer than a few days. In any climate where temperatures dip below this mark for a length of time, a supplemental heating system is recommended.
  2. A Large Home – Heat pumps come in many different sizes, but if yours does not have the capacity to match the size of your home, then it won’t be able to heat the whole house. It’s as simple as that. If you are installing a new heat pump, be sure to get one that is properly sized. But, if you have an existing heat pump that is overmatched by your home’s size, simply supplementing it may be the easiest solution.
  3. The Power Goes Out – A heat pumps’ use of electricity is a benefit in most situations, but unfortunately it means they are helpless when the power goes out. To avoid suffering in the winter chill when a blizzard takes out a local power line, have a backup/supplemental heat source on hand to use until the power comes back on.

Those are a few situations you may encounter in which supplementing a heat pump is a good idea. Remember, though, that each situation is different. When installing a new heat pump, consult with the San Marcos professional installer beforehand to see if you should also have a supplemental heat system in addition to the heat pump.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

What Happens if You Put Your Air Filter in the Wrong Way? A Question From Carlsbad

Wednesday, October 12th, 2011

Air filters are important pieces in your overall Carlsbad home’s comfort system. They keep unwanted debris and sediment out of your indoor air and they help your system run smoothly for years to come. However, if you’re not careful, an air filter put in backwards can lead to quite a few problems with your heating and cooling system.

The Most Common Problems

The most common problem you will face with a backwards facing filter is simple inefficiency. If your furnace is forced to blow air through the non-porous end of a filter, it will take more energy to do so. The blower will be overworked and you will pay more money for your heating. The same is doubly true for an air conditioner which has multiple filters in place to keep outdoor contaminants out of your indoor air.

Beyond the cost of improper filtering, you will likely suffer from a decrease in indoor air quality. The filter is designed to remove a lot of unwanted debris, but only when installed in a certain direction. If you set your filter up backwards, the normally collective end of the device will not face the air supply. In effect, your filter will help keep debris in the air.

This results in a clogged filter and improperly cleaned air when it reaches your lungs. If you have a home indoor air quality system it will help to supplement this problem for a while, but the clog will eventually become too much for your system.

Avoiding the Problem

There are two ways to avoid improper installation. First, you can have a professional install the system for you. Whenever you need a new filter ask someone to come and take care of it. When they do, though, pay close attention to how they set the filter and any other steps they take. By carefully watching you can ideally learn what it takes to do this step yourself and hopefully keep your system running smoothly for years to come.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

How Do EER and SEER Work? A Question From Rancho Bernardo

Friday, September 23rd, 2011

If you’ve looked for a new air conditioner in Rancho Bernardo recently, you probably noticed each unit comes with an EER or SEER rating. The former is for room air conditioners and the latter for central air conditioning units. In both cases, the number is a measure of how efficiently the system uses electricity. Effectively, if you buy a system with a high rating, you spend less on electricity. Of course, there are tradeoffs. The higher rated machines tend to cost much more, so as a homeowner, you’ll have to evaluate how much you can spend now and how long it will take to save money from that investment.

How EER and SEER Are Measured

These numbers are required by the government to tell you, the consumer, how many BTUs per hour the device can use for every watt of electricity drawn. The more BTUs a system can use, the better for your bill.

Let’s say you want to buy a 10,000 BTU system to cool your living room and dining room. A pretty standard number for a single room unit is 11, meaning the 10,000 BTU system would use about 900 watts per hour to run at full capacity. We figure this out by dividing the BTUs (10,000) by the watts (900).

There is a lot of math to do here, so many people simply look for a higher number within their price range. But, at what point is the upgrade really worth your extra money?

Choosing the Right Energy Efficiency Rating

The easiest way to describe this is to compare two similar devices with different EERs:

Air Conditioner 1 Air Conditioner 2
BTUs 12,000 12,000
EER 9 11
Watts 1333 1091
Price $300 $450

In this particular case, we can spend more for a device that is the same size but uses less electricity. The question then is whether that increased expenditure will pay off in the short term. Let’s assume each device would be operated for 10 hours per day for 30 days in a typical summer month. That’s 300 hours of operation. If the average cost per kWh in you are is $0.09, it will take 4 hours for the first air conditioner to consume 1 extra kilowatt of electricity equal to an additional $0.09. If your air conditioner runs for four months out of the year, we know that it will operate for a total of 1200 hours. That means:

[(1200 hrs x 242 watts) / (1000 watts/kw) ] x $0.09/kWh = $26

So, you save roughly $26 per year from that high efficiency unit. With a $150 price difference, you will break even after 6 years (though probably sooner if the price of electricity goes up).

Don’t forget, however, that central systems are a much more efficient option with SEERs of up to 16.5 and much larger BTU areas to cover. The savings there can add up very quickly. If you have any questions, contact your local air conditioning professional.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

Ductless vs. Duct Air Conditioning Systems in Pacific Beach

Friday, August 12th, 2011

When it comes time to pick out a new air conditioning system for your Pacific Beach home, you will have to make the choice between ductless and duct models. While both of these types of systems have their advantages, the specifics of your situation will go a long way to determining which one is right for you.

Ductless air conditioning systems are becoming more and more popular these days for a number of reasons. For one, they are generally considered more energy efficient than their ducted counterparts. Also, ductless systems are often cheaper and simpler to install, particularly in a house that does not already contain ductwork.

These types of air conditioners use refrigerant lines to connect the indoor unit or units to the outdoor compressor. The refrigerant lines take up much less space than ducts do and they also are much easier to install. Refrigerant lines can also reach into areas of your house that ducts may not be able to, making it possible for you to bring the benefits of air conditioning to places that did not have access to it before.

The indoor unit of a ductless air conditioning system can generally handle the cooling load of one or two rooms, but if you want to cool a larger space, it will be necessary to install multiple indoor units throughout the house. All of these units can connect to the same outdoor compressor and they can also be controlled individually. That means that you can set different temperatures in different parts of your house and you do not have to pay to cool the entire space if no one is occupying certain parts at the moment.

A duct air conditioning system also involves indoor and outdoor components. However, these elements are connected to each other by a system of ducts rather than by refrigerant lines. In a duct system, cooled air is brought inside from the compressor and then circulated through various ducts by the air handler.

The latest duct systems are quite energy efficient as well, and they can also be coupled with zone control systems to create different climate zones within your house. Particularly if you already have some ducts in place, a duct air conditioning system can be a great option for you.

Tags: , , , ,
Posted in Air Conditioning | Comments Off