Posts Tagged ‘San Marcos’

« Older Entries

The Top Air Conditioning Brands on the Market in San Diego

Monday, May 14th, 2012

If you live in San Diego, it might be about time to buy a new air conditioner. The first step is to determine which brand is right for you, but where do you start? There are dozens of brands out there and each has its own specific benefits to offer. Which selection will serve your family best? Let’s take a closer look.

What Type of Air Conditioning

The first question to ask is what type of air conditioner installation do you want for your home. If you plan on installing a central system, your best bet is to go with a model from one of the traditional air conditioning manufacturers. Trane and Carrier in particular have been mainstays in the AC industry for decades.

Carrier and Trane provide some of the best products on the market and they both offer a wide variety of air conditioners ranging from low BTU split systems to full sized packaged systems for multi-room cooling (and sometimes heating too).

On the other hand if you want a mini splits air conditioner, the brand names you’re considering may be a little different. Since the mini splits technology is new to the United States, the most advanced systems come out of Japan. Mitsubishi and Sanyo in particular offer some of the best quality devices, complete with DC inverter technology allowing multi-zone cooling. Klimaire is another popular brand, though their systems are not as efficient for multi-room cooling with a single condenser.

Cost

While Trane and Carrier are among the best manufacturers, the cost of their systems tends to reflect this high standing. Goodman is a top choice for quality to cost ratio. Their systems are among the least expensive to buy through a distributor and they are less selective about installation so it is easier to find a contractor to install your unit. A lot of installers feel that the technology today makes the top brands hard to distinguish from each other – the real key is having the system properly sized and installed.

Top of the Line Systems

If you are interested in a high capacity system with expert installation, consider a Trane or Carrier system. If cost is an issue, look for a contractor who installs Trane, Carrier and Goodman products as Goodman offers some very good air conditioners without the premium price tag. For ductless mini-splits Mitsubishi offers the highest quality systems, though beware that you will pay a premium for that quality as well.  Please call Cal-West Air Conditioning if you have any questions about a new air conditioning system.

Tags: , ,
Posted in Air Conditioner Installation, Air Conditioning, Air Conditioning in San Diego | Comments Off

Steps to Take Before Turning on Your Furnace in San Marcos

Monday, April 9th, 2012

You are feeling a chill in the air. The outside temperatures are going down each day and the nighttime temperatures are forcing you to break out the flannel pajamas, robes, and blankets. It’s getting cooler and you are holding off turning on your furnace in San Marcos for the first time of the season, maybe because you envision high utility bills or you are afraid of what you’ll hear, feel, or see coming from your furnace after several months of inactivity.

There’s not much you can do to control higher utility bills, they are like death and taxes. But there are some things you can do to take the “mechanical anxiety” out of turning on your furnace for the first time.

You can’t go back in time but you may want to consider “summerizing” your furnace after you shut it down in preparation for the cooling season – or during the cooling season. Have a qualified heating and cooling technician stop by for a quick furnace maintenance an inspection and cleaning.

A preseason inspection and cleaning will prevent some problems that may affect some of your senses later on. For example, a smell coming from your furnace may indicate a burning or smoldering electrical component. A noise may indicate a noisy fan or a loose belt, causing poor or no airflow. Touching your ventilation system and feeling for any vibration can indicate poor airflow. Visually checking your instruments like thermostats for verifying proper temperatures or a digital readout on our carbon monoxide alarm for any traces of harmful gas are also important to furnace start-up.

If something goes wrong, don’t blame it on your thermostat or the cold weather; blame it on a lack of preventive maintenance. Your best bet is to have a qualified service technician do a clean and inspection – to minimize any surprises at start-up and to keep you and the occupants of your home comfortable and safe while your furnace begins another season of hard work.  If you have any questions about this process please call Cal-West Air Conditioning

Tags: , ,
Posted in Furnace, Furnace Maintenance, Heating | Comments Off

Four Popular Mold Myths About Oceanside Homes

Wednesday, March 21st, 2012

There has been a large amount of terrible predictions made about mold, and the harmful effects it can have on indoor air quality in Oceanside.  Even though mold does have an adverse affect on air quality, a good number of these myths are simply false. To assist you in avoiding the excessive scares and unnecessary worrying, we will provide you with some of the most popular myths we have heard featuring mold:

  • Black Mold!! – Black mold is not the only mold you should worry about. While black mold does produce mycotoxins and can be quite dangerous if it develops in your living space, all molds can be potentially dangerous due to the off gassing of MVOCs and other chemicals. If you see mold – whether green, black, grey, or red – call someone immediately to test and check your home for toxicity.
  • Scrubbing with Bleach Gets Rid of Mold – Mold can be removed with bleach, but only on the surfaces you can reach. Real mold removal uses more advanced techniques to clear away spores, block sources of moisture and reduce the presence of the toxins produced by mold. It’s impossible to ever truly, 100% remove mold from any environment, but with the right abatement techniques, you can reduce its impact.
  • Mildew Isn’t a Big Deal – Mildew may have a different name but it’s the same problem. Mildew is a certain kind of mold and that stale, musty smell you experience when it develops is the development of microbial volatile organic compounds – chemicals like benzene and aldehyde. To ensure mildew doesn’t have a negative impact on the health of your family, be sure to reduce and remove moisture from your home whenever it develops – in basements and attics as well as bathrooms and kitchens.
  • Mold Needs Organic Material to Grow – Mold can grow on anything with enough moisture. While carpets, upholstery, paper and other organic based materials are more likely to develop mold, it can grow on glass, porcelain and metal if enough of the spores are present. The key to mold abatement is not material changes or closing it out; it is to remove the moisture, seal up holes, and consider installing a dehumidifier.

Mold is a major health problem for millions – by better understanding it, you can minimize the risk and keep your family safe. If you suspect mold in your home, don’t wait to have it checked. Call Cal-West Air Conditioning today for full testing, inspection and, if necessary, removal.

Tags: , ,
Posted in Air Filters, Dehumidifiers, Indoor Air Quality | Comments Off

Carmel Valley Furnace Maintenance Guide

Monday, January 23rd, 2012

Depending on its frequency, there are different types of maintenance tasks associated with keeping your automobile in tip top shape. Did you also know there are tasks that can be performed at various intervals to keep your Carmel Valley home’s furnace in peak running condition? Well, there are.

For example, the most frequent maintenance task is checking the filters in your air handling unit. These are often called furnace filters but in reality, they serve the same function to filter air to and from your air conditioner, too. It might be easiest to just call them air filters. The frequency of replacing or cleaning air filters usually depends on the type of indoor environment you live in – like humidity levels, number of household pets or occupants, etc. In general, filter maintenance should occur every one to three months.

A less frequent maintenance task is cleaning the moving parts of the internal mechanism. You may only need to have your furnace cleaned every six months to a year, depending on its use. In some cases you can perform the cleaning yourself or it is included in an annual cleaning as part of a service agreement with a qualified heating and cooling contractor. A furnace can typically run at peak efficiency when it is cleaned on an annual basis.

You can also make it a regular habit of checking the motor bearings and fan belt, too. You can lubricate the bearings and tighten or replace the fan belt on a same schedule as cleaning the moving parts.

Other maintenance tasks related to your furnace, which may require longer interval times include ventilation system cleaning, or more commonly known as duct cleaning. Some homes don’t require this type of maintenance more than every five to ten years – perhaps longer. Unless there are unusually high levels of dust, allergens, or contaminants in the air, most ventilation systems can remain clean for several years.

Of course, you can turn all of your maintenance tasks over to a heating and cooling contractor – and have the most peace of mind.

Tags: , , , , ,
Posted in Heating | Comments Off

Do I Need to Supplement My San Marcos Heat Pump with Another Heating System?

Friday, January 6th, 2012

People often turn to heat pumps in San Marcos as a solution for their home heating and cooling needs because they want a single, all-inclusive system that covers all the bases. The convenience and simplicity is part of the allure of choosing a heat pump to begin with.

However, it’s not always that simple. There are situations where a heat pump is not enough to handle the needs of the whole home. This doesn’t necessarily mean that the whole idea goes out the window, but the heat pump may need some help in the form of a supplementary heating supply.

Here are some reasons/situations that may call for a supplemental heat source in addition to a heat pump:

  1. A Cold Climate – Although heat pumps can serve as the primary heating system when temperatures drop as low as 30 degrees Fahrenheit, they have trouble keeping up when the cold snap lasts longer than a few days. In any climate where temperatures dip below this mark for a length of time, a supplemental heating system is recommended.
  2. A Large Home – Heat pumps come in many different sizes, but if yours does not have the capacity to match the size of your home, then it won’t be able to heat the whole house. It’s as simple as that. If you are installing a new heat pump, be sure to get one that is properly sized. But, if you have an existing heat pump that is overmatched by your home’s size, simply supplementing it may be the easiest solution.
  3. The Power Goes Out – A heat pumps’ use of electricity is a benefit in most situations, but unfortunately it means they are helpless when the power goes out. To avoid suffering in the winter chill when a blizzard takes out a local power line, have a backup/supplemental heat source on hand to use until the power comes back on.

Those are a few situations you may encounter in which supplementing a heat pump is a good idea. Remember, though, that each situation is different. When installing a new heat pump, consult with the San Marcos professional installer beforehand to see if you should also have a supplemental heat system in addition to the heat pump.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Carmel Valley Heat Pumps and Energy Efficiency

Monday, December 26th, 2011

Heat pumps offer a number of great benefits. For one, they are inclusive heating and cooling solutions, so they can maintain your Carmel Valley home at a comfortable temperature year round without the need for an additional system.

They run on electricity, so you don’t have to worry about the inconvenience of additional bills and keeping a fuel supply around. They are also quiet and relatively easy to maintain—the list goes on and on. The point is, provided you live in a climate where heat pumps can operate properly, they make for great heating and cooling options.

One other huge advantage of heat pumps is that they are very energy efficient, often much more so than other heating and cooling options. For one, the heating efficiency of heat pumps can range from 150-300%, meaning that the amount of heat energy they are able to produce is 1.5 to 3 times greater than the amount of electricity they draw to do it. That is an incredibly efficient exchange.

The United States Environmental Protection Agency awards the EnergyStar to devices and appliances that surpass energy efficiency guidelines. Heat pumps that have earned the EnergyStar are even more efficient than their brethren, sometimes by as much as 9%, according to the EPA. If you have an older heat pump in your home already, a newer EnergyStar rated model may be as much as 20% more efficient.

While these numbers by themselves may not seem Earth shattering, consider two things. First, in an age of constantly escalating energy costs, any savings are welcome. Second, rewarding energy efficient homes has been a focus of the federal government for a few years. To that end, homes with EnergyStar rated heat pumps installed may be eligible for a federal tax credit of up to 30%. So, not only do these devices help you save on your bills, but on your taxes as well.

The benefits of heat pumps are numerous, but perhaps none is a bigger plus than their extremely efficient use of energy. You can save electricity and save money, all while keeping your home comfortable year round.

If you are considering a heat pump for your home, these benefits are important to keep in mind while making your decision.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

San Marcos HVAC Tip: Where to Place a Thermostat for Accurate Heating

Wednesday, December 21st, 2011

It’s easy to forget that with your furnace in the basement churning away all day to keep your San Marcos home warm, but your thermostat is the single most important device in ensuring your home is heated to the temperature you want. If it stops working or it misreads the temperature inside your home, your furnace won’t know what temperature it actually is and will turn on and off at the wrong time.

Where Not to Place Your Thermostat

To avoid inaccurate readings, avoid placing your thermostat in the following locations:

  • Direct Sunlight – Direct sunlight will almost always increase the perceived temperature of the thermostat. Unless you live in a greenhouse, this will be very uncomfortable for everyone in your home.
  • Windows – Windows can result in direct sunlight and breezes. If the windows are not properly sealed, cold air can blow in and make it seem cooler in your home than it really is. In any of these cases, your thermostat will misread the indoor temperature.
  • Drafts – Drafts from improperly sealed doors, windows, or anything else in your home can negatively impact the thermostat.
  • Heat Vents – Don’t place your thermostat near a radiator or heat vent where it is likely to be warmer than anywhere else in the house.
  • Kitchens – Kitchens tend to be warmer than other rooms in the house, especially when in use. Avoid placing a thermostat here unless you have a zone control system and your kitchen is separate from other rooms.

A properly placed thermostat will ensure your San Marcos home is heated or cooled to the temperature you desire regardless of outdoor conditions. If you’re unsure whether your thermostat is calibrated properly, check the temperature with a separate thermometer in a different location in the same room. If it is significantly warmer or cooler in one place than another, try to determine which is more indicative of the actual comfort level in your home. When properly located, your thermostat should never be an issue again.

Tags: , , , , ,
Posted in Heating | Comments Off

What Size Furnace is Right for My San Marcos Home?

Monday, December 5th, 2011

When it comes to your San Marcos home’s heating equipment, the right size is very important. If your furnace is sized correctly, you will enjoy a high level of indoor comfort, which you should. However, an incorrectly sized furnace may result in many cold spots in your home, an overworked furnace, or higher utility bills.

An undersized furnace will turn off and on frequently, which is called short cycling. Short cycling can lead to moisture in the system, causing less efficiency and damage to equipment from accumulating moisture in the heating system. The constant cycling adds to wear and tear on equipment, too. An oversized furnace may not be able to keep up with the demand for heat during the coldest days. The furnace may be constantly running and unable to keep up – adding to higher utility costs. So size really does matter when it comes to selecting the right heating equipment for your home.

But a big furnace does not mean it is right-sized. Have you ever seen a “five-way” gravity furnace? It was manufactured in the mid-1900’s and took up a lot of room – as much as half of a basement – while being extremely inefficient. The key here is efficiency. A furnace that works right is sized to the space it is heating, which does not include attics, crawlspaces, or uninsulated rooms (porches, mud rooms, etc.).

A furnace must make efficient use of its Btu’s, which is abbreviated for British thermal unit. Btu is used to measure a furnace size. Furnaces are often rated by input Btu, which is the amount of energy consumed when running. The output Btu may be different based on the system. And output Btu is the best way to select a furnace, since this is the actual heating capacity.

When sizing a furnace, the first thing to do is to determine the inside space that will be heated. If you are looking to heat your home, you can measure the square footage of each room (multiply width by length). The rooms should include bathrooms and hallways but exclude attics and crawlspaces. Add up the totals and match up the Btu output to the total square footage. If you aren’t sure of your calculations, call a qualified heating and cooling contractor.

There are many factors that go into heating a home and today’s energy efficient furnaces give homeowners many more choices. Whatever furnace you choose to purchase, make sure you do your homework and hire a qualified professional HVAC contractor to determine the best size furnace for your home.

Tags: , , , ,
Posted in Heating | Comments Off

Easy Ways to Lower Your Heat Pump’s Energy Bill: Some Pointers from San Marcos

Wednesday, November 16th, 2011

One of the biggest advantages of a heat pump is that it is highly efficient for both heating and cooling your San Marcos home. However, there is always room for improvement, so here some tips to lower your energy bill even more:

  • Get it checked. It’s been said many times before, but it’s always worth saying again: consistent maintenance is one of the biggest keys to keeping any appliance running efficiently. Get your heat pump inspected by a professional at least once a year. This will keep it in good shape and provide an opportunity to make small repairs, before they have a chance to turn into big problems.
  • Keep it clean. When it comes to HVAC equipment, a clean unit is an efficient unit. Check and replace the filters regularly, according to the manufacturer’s instructions. Keep the coils and fan clean. This will also be part of the annual maintenance, but you can – and should — do touch up cleaning on your own.
  • Install a thermostat. A programmable thermostat is a great energy efficiency tool for any home heating and cooling system, not just a heat pump. A thermostat will keep the temperatures lower during the day or any time no one is home, so that you are not wasting heat.
  • Let it run. It may seem counterintuitive, but turning off a heat pump to save energy may actually do more harm than good. Heat pumps operate most efficiently when they stay running on a regular basis. The components don’t need to take time to spin up, and the refrigerant stays warm so it can keep moving. Your best bet is to have your heat pump connected to a programmable thermostat, program it and then stop thinking about it. You’ll save a bundle over manual operation.
  • Protect the outdoor unit. The outdoor portion of your heat pump has to put up with a lot from the elements. Strong winds can damage them or negatively impact the efficient operation of the pump, so keep the outdoor unit protected from wind.

These simple measures, in combination with a highly efficient heat pump, will help slash your energy bills. In addition, check to see if your heat pump is eligible for a federal tax credit, which can save you even more money.

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

Air Conditioners and Energy Use by Percentage: A Guide From Fallbrook

Monday, September 19th, 2011

It’s no secret that air conditioners use up a lot of electricity and can add substantially to your energy bills during those warm summer months in Fallbrook. But did you know that they actually account for an estimated 11% of the total energy used in all buildings in the US each year? This is a staggering figure and makes it easy to see why it’s best to invest in the most energy efficient system possible.

Keeping Your Consumption Down

There are plenty of reasons to try and keep your energy consumption down. You want to save on your energy bills, and the less energy you use, the better it is for the environment. The best and most straightforward way to go about this is to purchase only highly energy efficient appliances and equipment, and that includes air conditioners.

Because air conditioner usage accounts for such a substantial part of the total energy used in this country, putting more energy efficiency models into use is the best way to cut that usage down.

Supplementary Cooling

However, there are other ways to reduce the workload of your air conditioner. For instance, you can use a ceiling fan to maintain good air circulation and keep your home cool. Using a ceiling fan with an air conditioner, even on the hottest days of the year, allows you to turn up your thermostat a bit to conserve energy while still enjoying a comfortable indoor environment. And because ceiling fans use so little energy to operate, you’ll come out ahead on your energy bill.

Passive Cooling

There are also several passive cooling methods you can employ to keep the temperature in your home down. Blocking out sunlight is the most important of these, so keep your blinds closed on any windows that receive direct sunlight, particularly in the early afternoon. Alternately, you can have awnings put up, which allow you to block the direct sun while still keeping the blinds open.

Shade is another effective passive cooling device. Planting trees around your home to block out the sun at the hottest times of day is a totally energy-free way of keeping your home cool and reducing the workload on your air conditioning system. The less your air conditioner has to work, the less energy it consumes and the lower your energy bills will be.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

« Older Entries